Toronto Smart Materials & Structures (TSMART)

Publications Journal Publications

Refereed Journal Publications
Refereed Conference Papers Published in Proceedings
Invited and Scholarly Addresses
Conference Presentations
Abstracts & Poster Presentations
Patents

Refereed Journal Publications

  1. [cover page] Rastegardoost M.M., Tafreshi O.A., Saadatnia Z., Ghaffari-Mosanenzadeh S., Park C.B., and Naguib H.E. (2023), Recent advances on porous materials and structures for high-perfromance triboelectric nanogenerators, Nano Energy, 111, 108365
  2. Tafreshi O.A., Saadatnia Z., Ghaffari-Mosanenzadeh S., Chen T., Kiddel S., Park C.B., and Naguib H.E. (2022), Flexible and shape-configurable PI composite aerogel films with tunable dielectric properties, Composites Communications, 34, 101274
  3. Cerny A.R., Cheng Y.H., Behzadi K., Baghelani M., Schultz R., Runka J., and Naguib H.E. (2022), Development of Flexible Moisture Sensors Based on the Corrosion and Degradation of Conductive Substrates, ACS Applied Electronic Materials, 4, 4340-4356
  4. Pearson A., Duncan M., Hammami A., and Naguib H.E. (2022), Interfacial adhesion and thermal stability of high-density polyethylene glass fiber composites, Composites Science and Technology, 227,109570
  5. Shi H.T.H., Hong S.H., and Naguib H.E. (2022), Direct‐Writing of Multi‐Functional Photo‐Reduced Graphene Oxide Fabric (rGOf) at the Liquid‐Air Interface with Tunable Porosity, Advanced Materials Technologies, 2200148
  6. Mohseni Taromsari S., Shi H.H., Saadatnia Z., Park C.B., and Naguib H.E. (2022), Design and development of ultra-sensitive, dynamically stable, multi-modal GnP@MXene nanohybrid electrospun strain sensors, Chemical Engineering Journal, 442, 136138
  7. Eskandarian L., Toossi A., Nassif F., Golmohammadi Rostami S., Ni S., Mahnam A., Alizadeh Meghrazi M., Takarada W., Kikutani T., and Naguib H.E. (2022), 3D‐Knit Dry Electrodes using Conductive Elastomeric Fibers for Long‐Term Continuous Electrophysiological Monitoring, Advanced Materials Technologies, 7, 2101572
  8. Tafreshi O.A., Ghaffari-Mosanenzadeh S., Karamikamkar S., Saadatnia Z., Kiddell S., Park C.B., and Naguib H.E. (2022), Novel, flexible, and transparent thin film polyimide aerogels with enhanced thermal insulation and high service temperature, Journal of Materials Chemistry C, 10(13), 5088–5108
  9. Olokede S.S., Neyestana M. L., Chu M., Daneshmand M., and Naguib H.E. (2021), A Planar Microwave Resonator with Odd Resonance for Calibration in Permanent Moisture Sensing Applications, Applied Physics Letters Vol.118, Issue 14
  10. Wang, J., Chen, Z., and Naguib, H.E. (2021), Preparation of a Novel Double Crosslinked Chitin Aerogel via Etherification with High Strength, Carbohydrate Polymers, CARBPOL-D-20-05659
  11. Lee, J.E., Nam, R., Jakubinek, M., Ashrafi, B., and Naguib, H.E. (2021), Development of PVDF nanocomposite with single-walled carbon nanotubes (SWCNT) and boron nitride nanotubes (BNNT) for soft morphing actuator” Smart Materials and Structures SMS-111407
  12. Chu, M., and Naguib, H.E. (2021), Novel Flexible Electrodes in Wearable Textiles for ECG Monitoring, Smart Materials and Structures, SMS-111443
  13. Husainie,S.M., Deng, X., Ghalia, M.A., Robinson, J., and Naguib, H.E. (2021), Natural fibers as reinforcement for closed-molded polyurethane foam plaques: mechanical, morphological, and thermal properties, Materials Today Communications, MTCOMM-D-20-02231
  14. Jo A., Huet C., Naguib H. E.(2020), Template-assisted Self Assembly of Conductive Polymer Electrodes for Organic Soft Robotics, Frontiers in Bioengineering and Biotechnology, section Bionics and Biomimetics, Manuscript ID: 547155
  15. Wang J., Chen Z., Guan A., Demarquette N. R., Naguib H. E. (2020), Ionic Liquids Facilitated Dispersion of Chitin Nanowhiskers for Reinforced Epoxy Carbohydrate Polymers, ADDMA-D-20-0001
  16. Mosanenzadeh S. G., Saadatnia Z., Karamikamkar S., Park C. B., Naguib H. E. (2020), Polyimide Aerogels with Novel Bimodal Micro and Nano Porous structure Assembly for Airborne Nano Filtering Applications, RSC advances, A-ART-04-2020-004295
  17. Wang S., Huang Y., Zhao C., Chang E., Ameli A., Naguib H. E., Park C.B. (2020), Theoretical Modeling and Experimental Verification of Percolation Threshold with MWCNTs’ Rotation and Translation around a Growing Bubble in Conductive Polymer Composite Foams, CSTE_2019_3019
  18. Mosanenzadeh S. G., Saadatnia Z., Karamikamkar, S., Park, C. B., Naguib, H. E. (2020), PPDA-PMDA Polyimide Aerogels With Tailored Nanostructure Assembly For Air Filtering Applications, Journal of Separation and Purification Technology, SEPPUR_2020_1122
  19. Karamikamkar, S.; Maryam F.; Naguib, H. E.; Park, C. B.(2020), In-Situ Interface Design in Graphene-embedded Polymeric Silica Aerogel with Organic/inorganic Hybridization, ACS Applied Materials & Interfaces, am-2020-04531.
  20. Wang W., Jiao S., Cao J., Naguib H. E. (2020), Zinc oxide/carbon nanotube nanocomposite for high-performance flexible supercapacitor with sensing ability, Electrochimica Acta, EA19-8610
  21. Eskandarian, L.; Lam , E.; Rupnow, C. ; Alizadeh M., Milad ; Hani H. E. (2020) Robust and Multifunctional Conductive Yarns for Biomedical Textile Computing, ACS Applied Electronic Materials, el-2020-00171j
  22. Chen T., Saadatnia Z., Kim J., Looi T., Diller E., Drake J. M., Naguib H. E.(2020), Novel, Flexible and Ultra-thin Pressure Feedback Sensor for Miniaturized Intra-ventricular Neurosurgery Robotic Tools”, IEEE Transactions on Industrial Electronics, 19-TIE-4065
  23. Ugalde A. R.; Kesler O.; Naguib H. E. (2020), Highly Stable Bifunctional Catalyst for Zn-Air Batteries: The Effect of a Nitrated Carbon Support on Co3O4 Activity, Journal of Power Sources, POWER-D-19-0582
  24. Chen, Z.; Sun, Y. ; Wang, J.; Qi, H. ; Wang, T.; Naguib, H.E.  (2020) Flexible, Reconfigurable, and Self-healing TPU/Vitrimer Polymer Blend with Copolymerization Triggered by Bond Exchange Reaction, ACS Applied Materials & Interfaces, am-2019-21411y
  25. Mosanenzadeh S. G., Alshrah M., Mosanenzadeh S. G., Park C.B., Naguib H. E. (2020), Hybrid Dianhydride Polyimide Aerogels with Enhanced Thermal Insulation for High Temperature Applications, Macromolecular Materials and Engineering, 305, 4, 1900777
  26. Anwer, A. A. W., Dong, T., and Naguib, H. E. (2020) Fiber Tortuosity and Its Effects on Shock Transfer Characteristics of Ultra High Molecular Weight Polyethylene (UHMWPE) Fibers Embedded in a Polyurethane Composite Structure, Composites Science and Technology, CSTE_2019_867 
  27. Shi, H. H.; Jang, S.; Reza Ugalde, A.; Naguib H. E. (2020), Hierarchically Structured Nitrogen-Doped Multi-Layer Reduced Graphene Oxide for Flexible Intercalated Supercapacitor Electrodes, ACS Applied Energy Materials, ae-201902038n
  28. Karamikamkar S, Naguib H E, Park C.B (2020), Advances in Precursor System for Silica-based Aerogel Production toward Improved Mechanical Properties, Customized Morphology, and Multifunctionality: a Review, Advances in Colloid and Interface Science, CIS_2019_154
  29. Stepniak K., Ursani A., Paul N. and Naguib H. E., (2020) Novel 3D printing technology for CT phantom coronary arteries with high geometrical accuracy for biomedical imaging applications, Bioprinting, BPRINT-D-19-00009
  30. Li Z., Yang Z., Naguib H. E. (2019), Introducing revolute joints into 1 piezoelectric energy harvesters, Energy, EGY_EGYD-19-03319
  31. Karamikamkar, S., Behzadfar, E, Naguib, H.E., and Park, C.B., Insights into In-situ Sol-Gel Conversion in Graphene Modified Polymer-based Silica Gels for Multifunctional Aerogels, Chemical Engineering Journal,  392, 123813
  32. Wickeler A. and Naguib H. E. (2019), Novel Origami-Inspired Metamaterials: Design, Mechanical Testing and Finite Element Modelling, Materials and Design, JMAD-D-19-02078
  33. Seshadri A., Vedula G., Naguib H. E.(2019), Scalable Sensing of Hydrocarbon Pollutants using Soluble Chemiresistive Polymer Composites, Materials Chemistry and Physics, MAC_122119.
  34. Li Z., Li T., Yang Z., Naguib H. E. (2019), Toward a 0.33W piezoelectric and electromagnetic hybrid energy harvester: design, experimental studies and applications, Applied Energy, 255, 113805.
  35. Saadatnia Z., Mosanenzadeh S. G., Li T., Esmailzadeh E., and Naguib H. E. (2019), Polyurethane Aerogel-Based Triboelectric Nanogenerator for High Performance Energy Harvesting and Biomechanical Sensing, Nanoenergy, 65, 104019.
  36. Morrison T. J., Sefton E., Marquez-Chin M., Popovic M. R., Morshead C. M., Naguib H. E. (2019), A 3D-Printed Device for Low Cost Neural Stimulation in Mice, Frontiers in Neuroscience, 466403
  37. Sun, Y. C., Leaker, B., Lee, J.E., Nam, R., and Naguib, H. E. (2019). Shape programming of polymeric based electrothermal actuator (ETA) via artificially induced stress relaxation. Scientific Reports, SREP-18-48589B
  38. Sun, Y. C., Chu, M., Huang, M., Hegazi, O., and Naguib, H. E. (2019) Hybrid Electroactive Shape Memory Polymer Composites with Room Temperature Deformability. Macromolecular Materials and Engineering, 304, 10, 1900196.
  39. Shen X., Naguib H. E. (2019), A robust ink deposition system for binder jetting and material jetting, Additive Manufacturing, 29, 100820.
  40. Stepniak K., Paul N., and Naguib H. E. (2019), Development of a Phantom Network for Optimization of Coronary Artery Disease Imaging using Computed Tomography, Biomedical Physics & Engineering Express, 255, 113805.
  41. Mosanenzadeh S. G., Saadatnia Z., Shi F., Park C.B., Naguib H. E. (2019), Structure to Properties Relations of BPDA and PMDA Backbone Hybrid Diamine Polyimide Aerogels, Polymer, 176, 213-226.
  42. Shi, H. H., Jang, S., & Naguib, H. E. (2019). A Freestanding Laser-Assisted Reduced Graphene Oxide Micro-Ribbon Textile Electrode Fabricated on Liquid Surface for Supercapacitors and Breath Sensors. ACS applied materials & interfaces.
  43. Anwer, M. A., Zhou, Y., & Naguib, H. E. (2019). Shear assisted two phase solvent extraction for high dispersion, filler wetting and fracture resistance in quasi-isotropic epoxy nano-composites. Composites Part B: Engineering, 172, 143-151.
  44. Mosanenzadeh, S. G., Saadatnia, Z., Shi, F., Park, C. B., & Naguib, H. E. (2019). Structure to properties relations of BPDA and PMDA backbone hybrid diamine polyimide aerogels. Polymer, 176, 213-226.
  45. Stepniak, K., Ursani, A., Paul, N., & Naguib, H. E. (2019). Development of a phantom network for optimization of coronary artery disease imaging using computed tomography. Biomedical Physics & Engineering Express.
  46. Li, Z., & Naguib, H. E. (2019). Effect of revolute joint mechanism on the performance of cantilever piezoelectric energy harvester. Smart Materials and Structures.
  47. Hoy, C. F., Naguib, H. E., & Paul, N. (2019). Fabrication and characterization of polymeric cellular foams for low-density computed tomography phantom applications. Journal of Cellular Plastics, 55(1), 73-87.
  48. Khalili, N., Chu, M., & Naguib, H. E. (2019). Solvent-assisted electrospun fibers with ultrahigh stretchability and strain sensing capabilities. Smart Materials and Structures, 28(5), 055018.
  49. Anwer, A. A. W., & Naguib, H. E. (2019). Determining thermo‐mechanical properties of polydimethylsiloxanes from their strain‐induced spectral fingerprints. Journal of Polymer Science Part B: Polymer Physics, 57(7), 359-367.
  50. Zhao, Y., Rafatian, N., Feric, N. T., Cox, B. J., Aschar-Sobbi, R., Wang, E. Y., … & Pahnke, A. (2019). A platform for generation of chamber-specific cardiac tissues and disease modeling. Cell, 176(4), 913-927.
  51. Saadatnia, Z., Mosanenzadeh, S. G., Esmailzadeh, E., & Naguib, H. E. (2019). A High Performance Triboelectric Nanogenerator Using Porous Polyimide Aerogel Film. Scientific reports, 9(1), 1370.
  52. Morrison, T. J., Sefton, E., Marquez-Chin, M., Popovic, M. R., Morshead, C. M., & Naguib, H. E. (2019). A 3D-Printed Device for Low Cost Neural Stimulation in Mice. Frontiers in Neuroscience, 13, 784.
  53. Sun, Y. C., Chu, M., Huang, M., Hegazi, O., & Naguib, H. E. (2019). Hybrid Electroactive Shape Memory Polymer Composites with Room Temperature Deformability. Macromolecular Materials and Engineering, 1900196.
  54. Anwer, M. A. S., Wang, J., & Naguib, H. E. (2019). 1D/2D CNF/GNP hybrid nanofillers: Evaluation of the Effect of Surfactant on the Morphological, Mechanical, Fracture, and Thermal Characteristics of their Nanocomposites with Epoxy Resin. Industrial & Engineering Chemistry Research.
  55. Anwer, M. A., Wang, J., Guan, A. Q., & Naguib, H. E. (2019). Chitin nano-whiskers (CNWs) as a bio-based bio-degradable reinforcement for epoxy: evaluation of the impact of CNWs on the morphological, fracture, mechanical, dynamic mechanical, and thermal characteristics of DGEBA epoxy resin. RSC Advances, 9(20), 11063-11076.
  56. Pearson, A., Oweimreen, T. S., & Naguib, H. E. (2019). Influence of glass fibers and rubber particles on the viscoelastic behavior of polyamide 6, 6 blended composites. Polymer Composites.
  57. Alshrah, M., Mark, L. H., Zhao, C., Naguib, H. E., & Park, C. B. (2018). Nanostructure to thermal property relationship of resorcinol formaldehyde aerogels using the fractal technique. Nanoscale, 10(22), 10564-10575.
  58. Anwer, A., & Naguib, H. E. (2018). Multi-functional flexible carbon fiber composites with controlled fiber alignment using additive manufacturing. Additive Manufacturing, 22, 360-367.
  59. Low, L., Ramadan, S., Coolens, C., & Naguib, H. E. (2018). 3D printing complex lattice structures for permeable liver phantom fabrication. Bioprinting.
  60. Khalili, N., Shen, X., & Naguib, H. (2018). An Interlocked Flexible Piezoresistive Sensor with 3D Micropyramidal Structures for Electronic Skin Applications. Soft Matter.
  61. Saadatnia, Z., Esmailzadeh, E., & Naguib, H. E. (2018). Design, Simulation, and Experimental Characterization of a Heaving Triboelectric-Electromagnetic Wave Energy Harvester. Nano Energy.
  62. Shi, H. H., Khalili, N., Morrison, T., & Naguib, H. E. (2018). Self-Assembled Nanorod Structures on Nanofibers for Textile Electrochemical Capacitor Electrodes with Intrinsic Tactile Sensing Capabilities. ACS applied materials & interfaces, 10(22), 19037.
  63. Khalili, Nazanin; Asif, Hassan; Naguib, Hani (2018), Towards Development of Nanofibrous Large Strain Flexible Strain Sensors with Programmable Shape Memory Properties, Smart Materials and Structures SMS-105970.
  64. Kyle W. Eastwood, Vivek P. Bodani, Faizal A. Haji, Thomas Looi M.Eng, Hani E. Naguib (2018), James M. Drake, Development of Synthetic Simulators for Endoscope-Assisted Repair of Metopic and Sagittal Craniosynostosis, Journal of Neurosurgery: Pediatrics, PEDS18-121
  65. Sai Wang, Amir Ameli, Vahid Shaayegan, Yasamin Kazemi, Yifeng Huang,
    Hani E. Naguib and Chul B. Park (2018),  Modelling the Cell Growth Effect on the Rotation and Translation of Rod-Like Fillers in Conductive Polymer Composite Foams, Polymers, polymers-266640.
  66. Zia Saadatnia, Ebrahim Esmailzadeh, and Hani E. Naguib (2018) , High performance triboelectric nanogenerator by hot embossing on self-assembled micro-particles, Advanced Engineering Materials, adem.201700957.
  67. Zia Saadatnia, Ehsan Asadi, Hassan Askari, Ebrahim Esmailzadeh, and Hani E.  Naguib (2018), A heaving point absorber based triboelectric-electromagnetic wave energy harvester: an efficient approach toward blue energy, International Journal of Energy Research, ID ER-17-8870.
  68. Sherif Ramadan, Narinder Paul and Hani E. Naguib (2018), The development of a myocardial tissue analogue, Journal of Biomaterials Science, Polymers edition, JBS-D-17-00488.
  69. Yu-Chen Sun; Shenyang  Cai ; Jie  Ren; Hani E Naguib (2017), Toward the low actuation temperature of flexible shape memory polymer composites with room temperature deformability via induced plasticizing effect, Journal of Materials Chemistry B, TB-ART-08-2017-002068, 2017.
  70. Mohamed Ali E. Kshad, Clement D’Hond, and Hani E. Naguib (2017), Carbon Nano Fibers Reinforced Composites Origami Inspired Mechanical Metamaterials with Passive and Active Properties, Smart Materials and Structures, SMS-105150.
  71. In, Walker E., Naguib H E, (2016) “Novel Development of 3D printable UV-curable Silicone for Multimodal Imaging Phantom”, Journal of Bioprinting, BPRINT_2016_18.
  72. Letellier, S. Ghaffari Mosanenzadeh, H. Naguib, V. Fierro, A. Celzard (2017), Acoustic properties of model cellular vitreous carbon foams, Carbon, 10.1016/j.carbon.2017.04.049.
  73. Reza Ugalde A., and Naguib H E. (2017) Double-Layer Membrane Cathode with Improved Oxygen Diffusivity in Zinc-Air Batteries, Energy Storage Materials, ENSM_2017_29
  74. Sean Lin, Muhammad A. S. Anwer, Yannan Zhou, Apoorv Sinha, Luke Carson, Hani E. Naguib (2017), Evaluation of the Thermal, Mechanical and Dynamic Mechanical Characteristics of Modified Graphite Nanoplatelets and Graphene Oxide Composites, Composites Part B, JCOMB_2017_618.
  75. Adam Pearson and Hani E. Naguib (2017), Novel polyurethane elastomeric composites reinforced with Alumina, Aramid, and poly(p-phenylene-2,6-benzobisoxazole short fibers, development and characterization of the thermal and dynamic mechanical properties Composites Part B, JCOMB_2017_341.
  76. Yu-Chen Sun, BASc, MASc; Shenyang  Cai ; Jie  Ren; Hani E Naguib (2017), Room Temperature Deformable Shape Memory Composite with Fine-tuned Crystallization Induced via Nanoclay Particles, Applied Polymer Science Polymer Physics B, 20170093.
  77. Lan, Aaron; Naguib, Hani; Coolens, Catherine (2017), “Development of a permeable phantom for Dynamic Contrast Enhanced (DCE) Imaging quality assurance: material characterization and testing” Biomedical Physics and Engineering Express, BPEX-100542.
  78. Anwer, Bagheri Z. G. Fernie and T. Dutta, H. Naguib (2016) Evolution of the Coefficient of Friction with Surface Wear for Advanced Surface Textured Composites”, Advanced Materials Interfaces. admi.201600983, 2016
  79. Oliviero, G. Landi, R. Rizvi, L. Verdolotti, H.C. Neitzert S. Iannace,H. Naguib and E. Di Maio (2017), Dielectric Properties of Sustainable Nanocomposites based on Zein Protein and Lignin as biodegradable insulators” Journal Advanced Functional Materials adfm.201605142, 2016
  80. Sherif Ramadan, Paul Narinder, Hani E. Naguib, (2017) Standardized Static and Dynamic Evaluation of Myocardial tissue properties. IOP biomedical materials,  Volume 12, Number 2, 2017.
  81. Kshad, Mohamed; Naguib, H E, (2016) Fabrication, Characterization, and Modeling of Polymeric Origami Structures with Direct Molding of Geometrical Features” by, Smart Materials and Structures, SMS-103637, 2016
  82. Rizvi, A. Anwer, G. Fernie and T. Dutta, H. Naguib,, (2016) Multifunctional textured surfaces with enhanced friction and surface wetting behavior produced by fiber de-bonding and pullout, ACS Applied Materials and Interfaces, am-2016-11497, 2016.
  83. Alshrah, M., Tran, M.-P., Gong, P. Naguib, H.E., and Park, C.B., (2016) “Development of High-Porocity Resorcinol Formaldehyde Aerogels with Enhanced Mechanical Properties through Improved Particle Necking Under CO2 Supercritical Conditions”, Journal of Colloid Interface Science, Vol. 485, pp. 65-74, 2016. DOI: 10.1016/j.jcis.2016.09.030
  84. Li, S., Sun YC, Guan Q., and Naguib H E., (2016) Effects of chitin nanowhiskers on the thermal, barrier, mechanical, and rheological properties of polypropylene nanocomposites, RSC Advances, DOI: 10.1039/C6RA11623J
  85. Ali Vahidifar, Saied Nouri Khorasani, Chul B. Park, Hossein Ali Khonakdar, Uta Reuter, Hani E. Naguib, Elnaz Esmizadeh, (2016) Towards the development of uniform closed cell nanocomposite foams using natural rubber containing pristine and organo-modified nanoclays, RSC Advances, RA-ART-03-2016-008168.
  86. Shi, H. T., Naguib, H. E., (2016) Highly flexible binder-free core-shell nanofibrous electrode for lightweight electrochemical energy storage using recycled water bottles, Nanotechnology, Volume 27, Issue Number 32
  87. Yousaf M., Shi H.T., Ma Z., Chen Y., Wang Y, Cao A, Naguib H.E. and Han P.S. (2016), Novel Superflex Electrodes for Electrochemical Storage Devices: Recent Progress and Challenges, Advanced Energy Materials, DOI 10. 1002 aenm.201600490 featured cover page
  88. Al Jahwari; F. Huang Y. Naguib H E Lo J, (2016) Relation of Impact Strength to the Microstructure of Functionally Graded Porous Structures of Acrylonitrile Butadiene Styrene (ABS) Foamed by Thermally Activated Microspheres, POLYMER-15-2385.
  89. Al Jahwari F and Naguib H E., (2016) Finite Element Viscoelastic Homogenization of Porous Structures with Statistical-based Equivalent Microstructure Reconstruction, Composites Part B, JCOMB-D-16-00293.
  90. Khalili, Nazanin; Naguib, Hani; Kwon, Roy, (2016) A constriction resistance model of conjugated polymer based piezoresistive sensors for electronic skin applications, Soft Matter, SM-ART-01-2016-000204
  91. Vahidifar, Ali; Nouri Khorasani, saied; Park, Chul; Naguib, Hani; Khonakdar, Hossein Ali, (2016), Fabrication and characterization of closed-cell rubber foams based on natural rubber/ carbon black by one-step foam processing, Industrial & Engineering Chemistry Research, ID: ie-2015-04448t.
  92. Hoy, C., Naguib, H. E., and Paul, N (2016) , Effect of Hydroxyapatite on Polymeric Phantom Materials for Controlled Attenuation for Computed Tomography Coronary Angiography, SPIE Medical Imaging, Manuscript ID: ie-2015-04448t.
  93. Anwer M A S, Naguib H E (2016), Study on the Morphological, Dynamic Mechanical and Thermal Properties of PLA Carbon Nanofiber Composites, Composites Part B , JCOMB-D-15-01706.
  94. Ghaffari S., Khalid S., Butler M., Naguib H E, (2015) Effect of filler arrangement and networking on the conductivity of new thermal management polymeric composites, Composites Part B, JCOMB-D-15-00792.
  95. Ghaffari S., Naguib H E (2015) Thermally Conductive Liquid Crystal Polymer and Hexagonal Boron Nitride Fiber Network in Polylactide Matrix” Journal of Polymer Science, Part B: Polymer Physics. polb.20150159. Cover Page Featured Article
  96. Lee, K Y; Shi, H T; Lian, K, Naguib, H E , (2015) Flexible Multiwalled Carbon Nanotubes/Conductive Polymer Composite Electrode for Supercapacitor Applications, Smart Materials and Structures SMS-102016.
  97. Al Jahwari F and Naguib H E., (2015) Analysis and Homogenization of Functionally Graded Viscoelastic Porous Structures with a Higher Order Plate Theory and Statistical Based Model of Cellular Distribution, Applied Mathematical Modelling, APM-D-14-02056.
  98. Sun, Y C; Terakita, D; Tseng, A; Naguib, H E (2015). ,Study on the thermoelectric properties of PVDF/MWCNT and PVDF/GNP composite foam” Smart Materials and Structures SMS-102018.
  99. Anwer M A S; Naguib; H E, Celzard A, Fierro V (2015), Comparison of the Thermal, Dynamic Mechanical and Morphological Properties of PLA-Lignin & PLA-Tannin Particulate Green Composites, Journal of Composites Part B, JCOMB-D-15-00373.
  100. Ghaffari S., Naguib H E (2015) Thermal Composites based on Biobased Polyamide with Tailored hBN Micro networks” Journal of Polymers and the Environment, JOOE-D-14-00264.
  101. Ghaffari S., Khalid S., Butler M., Naguib H E, (2015) Development of high thermally conductive and electrically insulative PLA hBn Composites for electronic packaging applications, (2015) Biobased Mater. Bioenergy 9, 145-154
  102. Song, J., Chen, Q., Naguib H E., (2015) Biocompatible shape memory polymer blends with high actuation force as artificial muscles European Polymer Journal EUROPOL-D-14-01341.
  103. Rizvi R., Naguib H E., Fernie G. and Dutta T., (2015) High Friction On Ice Provided By Elastomeric Fiber Composites With Textured Surfaces, Applied Physics Letters, 106, 111601.
  104. Song, J., Chen, Q., Naguib H E., (2015) Constitutive Modeling and Experimental Validation of the Thermo-mechanical Response of Shape Memory Composites (SMC)”, Journal of Intelligent Materials and Structures, DOI: 10.1177/1045389X15575086.
  105. Al Jahwari F., Anwer, A. and Naguib H E., (2015) Fabrication and Microstructural Characterization of Functionally Graded Porous Acrylonitrile Butadiene Styrene (ABS), and the Effect of Cellular Morphology on Creep Behaviour” Journal of Polymer Science, Part B., Polymer Physics Volume 53, Issue 11, 1 June 2015, Pages: 795–803.
  106. Mosanenzadeh S., Doutres O., Naguib H E; Park CB; Atalla N (2015) “A semi-empirical model relating micro structure to acoustic properties of open cell porous material”, Journal of Applied Physics, 117, 034305 (2015); doi: 10.1063/1.4905834
  107. Ghaffari Mosanenzadeh S., Khalid S, Cui Y, Naguib H E., (2015) High Thermally Conductive PLA Based Composites with Tailored Hybrid Network of hexagonal boron nitride and graphene nanoplatelets, Polymer Composites, DOI: 10.1002/pc.23398.
  108. Mosanenzadeh S., Doutres O., Naguib H E; Park CB; Atalla N,  (2014) Design and Development of Functionally Graded Polylactide Foams for Enhanced Acoustic Capabilities” Journal of Materials Science, DOI 10.1007/s10853-014-8681-6
  109. (Invited) Song, J. J. H Chang H. H. and Naguib H E, Design and characterization of porous biocompatible TPU/PLA shape memory polymer (SMP) blends with dynamic pores (2014), Polymer DOI 10.1016/j.polymer.2014.09.062
  110. In, E., Naguib, H E., Haider M., (2014) [1] E.In, H.Naguib, M. Haider,  “Mechanical stability analysis of carrageenan-based polymer gel for magnetic resonance imaging liver phantom with lesion particles,” J. of Medical Imaging, 1(3), 035502-1–8.
  111. Price, A D, Naguib, H E., and Ben Amara, F. (2014) Development of a deformable mirror based on conductive polymer actuator arrays for use in adaptive optics, Journal of Intelligent Materials and Structures, JIMS, doi: 10.1177/1045389X14557505.
  112. Khalili, Nazanin; Naguib, Hani; Kwon, Roy, (2014) Electro-chemo-mechanical constrained multi-objective optimization of PPy/MWCNT actuators, Smart Materials and Structures, 23 105022. doi:10.1088/0964-1726/23/10/105022.
  113. Mosanenzadeh S., Doutres O., Naguib H E; Park CB; Atalla N., (2014) “Modeling and inverse characterization of acoustic behavior of bimodal Polylactide foams”, Journal of Applied Acoustics, 88 (2015) 75–83.
  114. Khalili, Nazanin; Naguib, Hani; Kwon, Roy, (2014) Characterization and multiobjective optimization of PPy based trilayer actuators”, Synthetic Metals, 197 (2014) 34–47
  115. Jahani D, Ameli A., Sanai M, Weidan D. Park C B, Naguib H E, (2014) Characterization of the Structure, Acoustic Property, Thermal Conductivity, and Mechanical Property of Highly Expanded Open-Cell Polycarbonate Foams, Macromolecular Materials and Engineering Vol. 300, Issue 1, pp. 48-56, January 2015. DOI: 10.1002/mame.201400125. Back Cover Page Featured Article
  116. Rizvi, R., Yu, J., Naguib H E., and Biddiss E., (2014) “Effect of nano-particle filler type, content and stress on the piezoresistance of polyethylene nanocomposites” Polymer Engineering and Science, DOI: 10.1002/pen.24002.
  117. Mosanenzadeh S., Doutres O., Naguib H E; Park CB; Atalla N., (2014) Effect of Biopolymer Blends on Physical and Acoustical Properties of Bio-composite Foams, journal of Applied Polymer Science Part B Polymer Physics, POLB23522. Cover Page Featured Article
  118. Leung, S. N, Khan O., Naguib H E, Dawson F., (2014) Multifunctional Polymer Matrix Nanocomposites with Uniaxially-Aligned Liquid Crystal Polymer Fibrils and Graphene Nanoplatelets” Applied Physics Letters, 104, 081904
  119. Rizvi, L. Tong, H. Naguib, Processing and Properties of Melt Spun Polylactide-Multiwall Carbon Nanotube Fiber Composites, Polymer Science Part B: Polymer Physics, 13-10-0432. 2014.
  120. Guan Q. and Naguib H.E, “Fabrication and Characterization of PLA/PHBV-Chitin Nanocomposites and their Foams” Journal of Polymers and the Environment, 22, 1 (2014), Page 119-130.
  121. Ghaffari S. M., Naguib H.E., Park C B., and Atalla N, Development of Polylactide Open Cell Foams with Biomodal Structure for High Acoustic Absorption”, (2014) Journal of Applied Polymer Science Volume 131, Issue 7, Cover Page Featured Article
  122. Rizvi, R., Yu, J., Naguib H E., Porosity and Composition Dependence on Electrical and Piezoresistive Properties of Thermoplastic Polyurethane Nanocomposites Foams (2013), Journal of Materials Research Special Issue on Porous Materials, Journal of Materials Research, volume 28, issue 17, pp. 2415-2425.
  123. Jahani, D., Ameli, A, Jung, P., Barzegari, M.R., Park, C.B., and Naguib, H. (2013), “Open-Cell Cavity-Integrated Injection-Molded Acoustic Polypropylene Foams,” Materials and Design, PII: S0261-3069(13)00597-9, DOI: j.matdes.2013.06.063.
  124. Guan Q. and Naguib H.E, “A study of the physical and mechanical properties of biobased PLA/PHBV blend and foams” (2013), Journal of Biobased Materials and Bioenergy, 7: 5, 2013 , pp. 600-608(9)
  125. Leung, S.N., Khan, O.M., Chan, E., Naguib, H.E., Dawson, F., and Adinkrah, V., (2013) “A Study on Liquid Crystal Polymer-Hexagonal Boron Nitride Composites for Hybrid Heat Sinks,” Industrial & Engineering Chemistry Research DOI: 10.1021/ie3012775.
  126. Wang J., Boletelho S., Naguib H E., and Bazylak A, (2013) Development of a novel active polypyrrole trilayer membrane, ACS Sustainable Chemistry & Engineering Manuscript, 1 (2), pp 226–231
  127. Leung L., Naguib H.E., (2013) “Characterizing the Viscoelastic Behaviour of Poly(lactide-co-glycolide acid) – Hydroxyapatite Scaffolds”, Cellular Plastics 49(6)  497 – 506.
  128. Khan, O.M., Leung, S.N., Chan, E., Naguib, H.E., Dawson, F., and Adinkrah, V., (2013) “Effects of Micro-and-Nano-Sized Carbon Fillers on the Thermal and Electrical Properties of Polyphenylene Sulfide Based Composites,” Polymer and Engineering Science, Vol, 53, Issue 11, pp. 2398-2406, 2013 (DOI: 10.1002/pen.23503).
  129. Ghaffari S. M., Naguib H.E., Park C B., and Atalla N, (2013) Development and characterization of environmentally friendly open cell foams, Polymer Engineering and Science, Volume 53, Issue 9, pages 1979–1989.
  130. Maani, A. Naguib, H E., Heuzey M C, Carreau P. J., (2013) Effect of Compatibilization and Shear on the Foaming Behavior of Microcellular Thermoplastic Olefin Blends (TPO), Journal of Cellular Plastics, 49(3) 223–244.
  131. Leung S.N., Khan O.M., Chan E., Naguib H.E., Dawson F., Adinkrah V., and Lakatos-Hayward L., (2013) “Analytical modeling and characterization of heat transfer in thermally conductive polymer composites filled with spherical particulates” Composites Part B, Volume 45, Issue 1, February 2013, Pages 43–49
  132. Price, A. and Naguib, H.E., (2013) “A Unified Multiphysics Finite Element Model of the Polypyrrole Trilayer Actuation Mechanism” Intelligent Materials and Structures, Volume 24 Issue 5 March 2013 pp. 548 – 558.
  133. Chan, E., Leung, S.N., Khan, O.M., Naguib, H.E., Dawson, F., and Adinkrah, V., (2013) “Fabrication and Characterization of Ceramic-Filled Thermoplastics Composites with Enhanced Multifunctional Properties,” Journal of Thermoplastic Composite Materials, Vol. 27, Issue 4, pp. 541-557, 2014 (DOI: 10.1177/0892705712452746).
  134. Leung, S.N., Khan, O.M., Chan, E., Naguib, H.E., Dawson, F., Adinkrah, V., and Lakatos-Hayward, L., (2013) “Synergistic Effects of Hybrid Fillers on the Development of Thermally Conductive Polyphenylene Sulfide Composites,” Journal of Applied Polymer Science, Vol. 127, Issue 5, pp. 3293-3301, 2013 (DOI: 10.1002/app.37941) Cover Page Featured Article
  135. Chan, E., Leung, S.N., Khan, O.M., Naguib, H.E., Dawson, F., Adinkrah, V., and Lakatos-Hayward, L., (2013) “Novel Thermally Conductive Thermoplastic-Ceramic Composite Foams,” Macromolecular Materials and Engineering, 297(10), 1014-1020.
  136. Zhai, W; Wang, J; Chen, N; Naguib, H E.; Park, C B. (2012) The Orientation of Carbon Nanotubes in Poly(ethylene-co-octene) Microcellular Foaming, and Its Suppression Effect on Cell Coalescence, Polymer Engineering and Science – Volume 52, Issue 10, October 2012, Pages: 2078–2089.
  137. Leung, Naguib H.E. (2012) Characterization of the viscoelastic properties of poly(ε-caprolactone) – hydroxyapatite micro- and nano-composite scaffolds, Polymer Engineering and Science – Volume 52, Issue 8, August 2012, Pages: 1649–1660.
  138. Leung, Fan S., H.E. Naguib H.E. (2012) Fabrication of 3D electrospun structures from poly(lactide-co-glycolide acid) – nano-hydroxyapatite composites, Polymer Science Part B – Polymer Physics – Volume 50, Issue 4, 15 February 2012, Pages: 242–249.
  139. Price, A, Gillen, T., Liu, C.C., O’Shaughnessy, C.A. and Naguib, H.E. (2012) Influence of porous membrane core morphology on polypyrrole trilayer actuator performance, Journal of Cellular Plastics, 48 (1) pp. 22 – 38.
  140. Leung, L., and Naguib, H.E. (2012) Novel fabrication technique for 3D micropatterned electrospun poly(DL-lactide-co-glycolide) acid scaffolds, Journal of Applied Polymer Science, Volume 125, Issue S2, 25 September 2012, Pages: E61–E70.
  141. Liao X., Nawaby A. V., Naguib H. E. (2012), Porous Poly (lactic acid) (PLA) and PLA-Nanocomposite Structures, Journal of Applied Polymer Science, Volume 124, Issue 1, 5 April 2012, Pages: 585–594.
  142. Campbell, J.E., Suralvo, M., Hibbard G.D, and Naguib, H.E. (2012) Foamed Core Microtruss Nanocrystalline Ni Cellular Hybrids, Journal of Composite Materials, 46(1) 63–70.
  143. Jo, C., Naguib, H.E., and Kwon, R.H. (2011) Fabrication, modeling and optimization of ionic polymer gel actuator, Smart Materials and Structures, 20(4):045006.
  144. (Invited) Rizvi R., Cochrane B,, Biddiss E., and Naguib H., (2011) Piezoresistance characterization of poly(dimethyl-siloxane) and poly(ethylene)-carbon nanotube composites, Smart Materials and Structures, SPECIAL ISSUE: SMASIS 2010,  20(9):094003.
  145. Ahmad, A., Fahim, A., and Naguib, H.E. (2011) A study on the anchoring orientations of foam and sandwich composite with metal, Polymer Composites,32(4):596-603.
  146. Rizvi, R., Cochrane, B., and Naguib, H.E. (2011) Fabrication and characterization of melt blended polylactide-chitin composites and their foams, Journal of Cellular Plastics, 47(3):282-299.
  147. Eunji In and Naguib H E. (2011) Development of Mechanically Stable Polymer-Based Silica Aerogel, Cellular Polymers, 30(1):1-12.
  148. Leung, Naguib H.E. (2011) Viscoelastic Properties of Poly(ε-caprolactone) – Hydroxyapatite Micro- and Nano-Composites, Polymers for Advanced Technologies – Volume 24, Issue 2, February 2013, Pages: 144–150.
  149. Rizvi, T., Khan, O., and Naguib, H.E. (2011) Development and characterization of solid and porous polylactide-multiwall carbon nanotube composites, Polymer Engineering and Science, 51(1):43–53.
  150. Price, A, Kao, V.C., Zhang, J.X., and Naguib, E. (2010) Fabrication and percolation behaviour of novel porous conductive polyblends of polyaniline and poly(methyl methacrylate),  Synthetic Metals, 160(17-18):1832-1837.
  151. Zhai, W.T., Kuboki, T., Wang, L., Park, C.B., Lee, E.K., Naguib, H.E. (2010) Cell Structure Evolution and the Crystallization Behavior of Polypropylene/Clay Nanocomposites Foams Blown in Continuous Extrusion , Industrial & Engineering Chemistry Research, Vol. 49, Issue 20, pp. 9834-9845.
  152. (Invited) Rizvi, R., Kim, J.-K., and Naguib, H.E. (2010) The effect of processing and composition on the properties of polylactide-multiwall carbon nanotube composites prepared by solvent casting, Smart Materials and Structures, 19(9):094003 (8 pp).
  153. Simkevitz, S.L. and Naguib, H.E. (2010) Fabrication and analysis of porous shape memory polymer and nanocomposites, High Performance Polymers. 22(2): 159-183.
  154. Zhai, W., Leung, S.N., Wang, L., Naguib, H.E., and Park, C.B. (2010) Preparation of microcellular poly(ethylene-co-octene) rubber foam using supercritical carbon dioxide, Journal of Applied Polymer Science, 116(4): 1994-2004.
  155. Chan, C., Chan, E., and Naguib, H.E., (2010) Development and characterization of polypyrrole-polylactic conductive open-porous composites, Journal of Applied Polymer Science, 117(6):3187-3195.
  156. Attala, Y., Attala, N., Fu, J., and Naguib, H.E. (2010) Study of the effect of processing parameters on the sound absorption of open-cell microcellular polymeric foams, Noise Control Engineering Journal, 58(1):18-26.
  157. McRae, J., Naguib, H.E., and Attala, N. (2010) Mechanical and acoustic performance of compression molded open-cell polypropylene foams. Journal of Applied Polymer Science. 116(2): 1106-1115.
  158. Ahmad, A., Fahim, A., and Naguib, H.E., (2010) Load bearing properties of three-component polymer composites. Polymer Composites. 31(10): 1731-1737.
  159. Lee, K-M., Lee, E.K. , Kim, S.G. , Park, C.B, and Naguib, H.E., (2009) Bi-cellular foam structure of polystyrene from extrusion foaming process, Journal of Cellular Plastics. 45(6): 539-553.
  160. (Invited) Chan, C., Chang, S., and Naguib, H.E. (2009) Development and characterization of polypyrrole bi-layer and tri-layer thin porous films. Smart Materials and Structures. 18(10): 104022(12pp).
  161. Leung, L., In, E., and Naguib, H.E. (2009) A study on the development and in vitro biodegradation behaviour of poly(D,L-lactide-co-glycolide) 75/25 bioscaffolds. Plastics, Rubber and Composites: Macromolecular Engineering. 38(6): 222-228.
  162. (Invited) Rizvi, R., Kim, J.-K., and Naguib, H.E. (2009) Synthesis and characterization of novel polyethylene-multiwall carbon nanotube porous composites. Smart Materials and Structures (Special issue). 18(10): 1-10.
  163. Perron, J., Naguib, H.E., Daka, J., Chawla A., and Wilkins, R. (2009) A study on the effect of degradation media on the physical and mechanical properties of porous PLGA85/15 scaffolds, Journal of Biomedical Materials Research: Part B – Applied Biomaterials. 91(2): 876-886.
  164. Ahmad, A., Fahim, A., and Naguib, H.E., (2009) Design of new hybrid composites using metal embedded in polymer foam and foam composite. Journal of Composite Materials. 43(15): 1603-1619.
  165. Perron, J., Naguib, H.E., Daka, J., Chawla, A., and Wilkins, R. (2009) A parametric study on the processing parameters and properties of a porous PLGA 85/15 bioscaffolds. Polymer Engineering and Science. 49(10): 2062-2069.
  166. Chu, R.K.M., Naguib, H.E., and Attala, N. (2009) Synthesis and characterization of open-cell foams for sound absorption with rotational molding method, Polymer Engineering and Science, 49(9): 1744-1754.
  167. Campbell, J., Forte, F., Hibbard G., and Naguib, H.E. (2009) Periodic cellular metal/polyurethane foam hybrid materials, Journal of Composite Materials, 43(3): 207-216.
  168. Jo, C., Naguib, H.E., and Kwon, R.H. (2008) Modeling and optimization of electromechanical behavior of ionic polymer metal composite, Smart Materials and Structures, 17(6): 1-13.
  169. (Invited) Jo, C., and Naguib, H.E. (2008) Modeling the effect of strain rate on the mechanical properties of HDPE/clay nanocomposite foams. Polymer and Polymer Composites. 16(8): 561- 576.
  170. (Invited) Jo, C., Naguib, H.E., and Kwon, R.H. (2008) Design and optimization of IPMC for biomedical applications. Advances in Science and Technology (CIMTEC 2008). 54: 82-89.
  171. Richards, E., Rizvi, R., Chow A., and Naguib, H.E. (2008) Biodegradable composite foams of PLA and PHBV using subcritical CO2. Journal of Polymers and the Environment. 16: 258-266.
  172. Naguib, H.E. and Park, C.B. (2008) A study on the onset surface melt fracture of polypropylene materials with foaming additives. Journal of Applied Polymer Science. 109(6): 3571-3577.
  173. Wong, S., Lee, J.W.S., Naguib, H.E., and Park, C.B. (2008) Effects of processing parameters on the mechanical properties of injection molded thermoplastic polyolefin (TPO) cellular foams. Macromolecular Materials and Engineering. 293(7): 605-613.
  174. (Invited) Price, A., and Naguib, H.E. (2008) Synthesis and characterization of porous polyaniline conductive polymers. Cellular Polymers. 27(3): 201-212.
  175. Ahmad, A., Fahim, A., and Naguib, H.E. (2008) A study on the design and mechanical adhesion of polymer foam-metal joints. ASME Journal of Engineering Materials and Technology. 130(3):031011-1~031011-7.
  176. (Invited) Leung, L., Chan, C., Song, J., Tam, B., and Naguib, H.E. (2008) A parametric study on the processing and characterization of PLGA 50/50 bioscaffolds. Cellular Plastics. 44(3): 189-202.
  177. Leung, L., Chan, C., Baek, S., and Naguib, H.E. (2008) Comparison of morphology and mechanical properties of PLGA bioscaffolds. Biomedical Materials. 3(2): 1-9.
  178. (Invited) Wong, S., Naguib, H.E., and Park, C.B. (2007) Effect of processing parameters on the cellular morphology and mechanical properties of thermoplastic polyolefin (TPO) microcellular foams. Advances in Polymer Technology. 26(4): 232-246.
  179. Leung, L., Perron, J., and Naguib, H.E. (2007) A study of the mechanics of porous PLGA 85/15 scaffold in compression. Polymers and Polymer Composites. 15(6): 437-443.
  180. Price, A., Jnifene, A., and Naguib, H.E. (2007) Design and control of a shape memory alloy based dexterous robot hand. Smart Materials and Structures. 16(4): 1401-1414.
  181. (Invited) Cocaud, C., Price, A., Edgerton, A., Jnifene, A., and Naguib, H.E. (2007) Position control of an experimental robotic arm driven by artificial muscles based on shape memory alloys. International Journal of Mechanics and Materials in Design. 3(3): 223-236.
  182. Jo, C. and Naguib, H.E. (2007) Constitutive modeling of HDPE polymer/clay nanocomposite foams. Polymer. 48(11): 3349-3360.
  183. (Invited) Jo, C. and Naguib, H.E. (2007) Effect of nanoclay and foaming conditions on the mechanical properties of HDPE-clay nanocomposite foams. Journal of Cellular Plastics. 43(2): 111-121.
  184. Jo, C. and Naguib, H.E. (2007) Processing, characterization and modeling of polymer/clay nanocomposite foams, Journal of Physics: Conference Series (ICN&T 2006) 61(1): 861-868.
  185. Jo, C., Fu, J., and Naguib, H.E. (2007) Constitutive modeling for characterizing the compressive behavior of PMMA open-cell foams, Journal of Polymer Science Part B: Polymer Physics. 45(4): 436-443.
  186. Price, A., Edgerton, A., Cocaud, C., H.E. Naguib and Jnifene, A. (2007) A study on the thermomechanical properties of shape memory alloys-based actuators used in artificial muscles. Journal of Intelligent Material Systems and Structures. 18(1): 11-18.
  187. Jo, C., Fu, J., and Naguib, H.E. (2006) Constitutive modeling for intercalated PMMA/clay nanocomposite foams. Polymer Engineering and Science. 46(12): 1787-1796.
  188. (Invited) Fu, J. and Naguib, H.E. (2006) Effect of nanoclay on the mechanical properties of PMMA/clay nanocomposite foams. Journal of Cellular Plastics. 42,(4): 325-342.
  189. (Invited) Naguib, H.E., Park, C.B., Lee, P.C., and Xu, D. (2006) A study on the foaming behaviors of PP resins with talc as nucleating agent. Journal of Polymer Engineering. 26(6): 565-587.
  190. Jo, C., Fu, J., and Naguib, H.E. (2005) Constitutive modeling for mechanical behavior of PMMA microcellular foams. Polymer. 46(25): 11896-11903.
  191. (Invited) Fu, J., Jo, C., and Naguib, H.E. (2005) Effect of processing parameters on cellular structures and mechanical properties of PMMA microcellular foams, Cellular Polymers. 24(4): 177-196.
  192. Manninnen, A., Naguib, H.E., Nawaby, A.V., and Day, M. (2005) CO2 sorption and diffusion in polymethyl methacrylate-clay nanocomposites. Polymer Engineering and Science. 45(7): 904-914.
  193. (Invited) Manninnen, A., Naguib, H.E., Nawaby, A.V., Liao, X., and Day, M. (2005) The effect of clay content on PMMA-clay nanocomposite foams. Cellular Polymers. 24(2): 49-70.
  194. Naguib, H.E., Park, C.B., and Song, S-W. (2005) Effect of supercritical gas on crystallization of linear and branched propylene resins with foaming additives. Industrial and Engineering Chemistry Research. 44(17): 6685-6691.
  195. Lee, P.C., Naguib, H.E., Park, C.B. and Wang, J. (2005) Increase of open-cell content by plasticizing soft regions with secondary blowing agent. Polymer Engineering and Science. 45(10): 1445-1451.
  196. (Invited) Park, C.B., Padareva, V., Lee, P.C., and Naguib, H.E. (2005) Extruded open-celled LDPE-Based foams using non-homogeneous melt structure. Journal of Polymer Engineering. 25(3): 239-260.
  197. Park, C.B. Park, S.S., Ladin, D., and Naguib, H.E. (2004) On-line measurement of the PVT properties of polymer melts using a gear pump. Advances in Polymer Technology. 23(4): 316-327.
  198. Naguib, H.E., Park, C.B. and Reichelt, N. (2004) Fundamental foaming mechanisms governing the volume expansion of extruded polypropylene foams. Journal of Applied Polymer Science. 91(4): 2661-2668.
  199. (Invited) Naguib, H.E., Park, C.B., and Lee, P.C. (2003) Effect of talc content on the volume expansion ratio of extruded PP foams. Journal of Cellular Plastics. 39(6): 499-511.
  200. (Invited) Naguib, H.E., Wang, J., Park, C.B., Mukhopadhyay, A.K., and Reichelt, N. (2003) Effect of recycling on the rheological properties and foaming behaviors of branched polypropylene. Cellular Polymers. 22(1): 1-22.
  201. Naguib, H.E., Park, C.B., Reichelt, N., and Panzer, U. (2002) Strategies for achieving ultra low-density polypropylene foams. Polymer Engineering and Science. 42(7): 1481-1492.
  202. Park, S.S., Park, C.B., Ladin, D., Naguib, H.E., and Tzoganakis, C. (2002) Development of a dilatometer for measurement of the PVT properties of a polymer/CO2 solution using a foaming extruder and a gear pump. ASME Transactions, Journal of Manufacturing Science and Engineering. 124(1): 86-91.
  203. (Invited) Ladin, D., Park, C.B., Park, S.S., Naguib, H.E., and Cha, S.W. (2001) Study of shear and extensional viscosities of biodegradable PBS/CO2 solutions. Journal of Cellular Plastics. 37(2): 109-148.
  204. (Invited) Park, C.B., Liu Y., and Naguib, H.E. (1999) Challenge to fortyfold expansion of biodegradable polyester foams by using carbon dioxide as a blowing agent. Cellular Polymers. 18(6): 367-384. Also published, with the permission of Cellular Polymers in Journal of Vinyl & Additive Technology. 6(1): 39-48, 2000.

<Refereed Conference Papers Published in Proceedings

  1. Zia Saadatania, Shahriar Ghaffari, Ebrahim Esmailzadeh, Hani E. Naguib, High performance triboelectric nanogenerator using polyimide aerogel for energy harvesting and active sensing,  Paper [10601-4], Proc. SPIE. 10601, Smart Materials an Nondestructive Evaluation for Energy Systems IV 2018.
  2. Khan, M.O., Leung, S.N., Chan, E., Naguib, H.E., Dawson, F., Adinkrah, V., and Lakatos-Hayward, L. The multifunctional characteristics of carbonaceous filler-reinforced poly (phenylene sulfide) composites, SPE ANTEC Technical Papers, Manuscript ID: PENG-11-2010-0446 Boston, MA, USA, May 1-5, 2011.
  3. Chan, E., Leung, S.N., Khan, M.O., Naguib, H.E., Dawson, F., Adinkrah, V., and Lakatos-Hayward, L. Low-density polyethylene composites filled with ceramic fillers for electronic packaging applications, SPE ANTEC Technical Papers, Manuscript ID: PENG-11-2010-0444 Boston, MA, USA, May 1-5, 2011.
  4. Leung, S.N., Khan, M.O., Chan, E., Naguib, H.E., Dawson, F., Adinkrah, V., and Lakatos-Hayward, L. Development of thermally conductive and electrically insulating polymer composites for electronic packaging applications, SPE ANTEC Technical Papers, Manuscript ID: PENG-11-2010-0389 Boston, MA, USA, May 1-5, 2011.
  5. Leung, S.N., Khan, M.O, Chan, E., Naguib, H.E., Dawson, F., Adinkrah, V., and Lakatos-Hayward, L., Enhanced Thermally Conductivity of Novel Multifunctional Polyphenylene Sulfide Composites Embedded with Heat Transfer Networks of Hybrid Fillers, SPIE Smart Structures/NDE 2011, San Diego CA USA, Mar. 6-10, 2011 Paper Number: 7978-43.
  6. Rizvi R., Cochrane B.,, Naguib H., and Lee P., Novel Biodegradable Composites and Foams of Polylactide and Chitin, SPIE Smart Structures/NDE 2011, San Diego CA USA, Mar. 6-10, 2011.
  7. Maher, A., Chan, E., Leung, S.N. Naguib, H., Dawson, F., Adinkrah, V., and Lakatos-Hayward, L., Three-Dimensional Multiphysics Analyses of a CPU Integrated Thermal heat Sink, ASME IMECE 2010. Paper Number:40649, Vancouver, BC Canada, Nov. 12-18, 2010.
  8. Leung L., Khatounabad E., and Naguib H.E. Fabrication and characterization of electrospun poly(DL-lactide-co-glycolide) acid – hydroxyapatite composite scaffolds, ASME IMECE 2010, Paper Number: 39027, Vancouver, BC Canada, Nov. 12-18, 2010.
  9. Leung L., Mortazavi S., Dick S.M. and Naguib H.E., Comparative study on the effect of filler size on the mechanical properties of poly(DL-lactide-co-glycolide) acid – hydroxyapatite composite scaffolds, ASME IMECE 2010. Paper Number: 39021, Vancouver, BC Canada, Nov. 12-18, 2010.
  10. Badawy, D.A., Zhao, Y., Lidan, Y., Naguib, H.E., Bio-Composite Microfluidic Platforms for Bone Cell Mechanobiology Study, 2010 ASBMR, Toronto ON, Oct. 15-19, 2010.
  11. Rizvi R., and Naguib H.E., Porous Polylactide Nanocomposites Reinforced with Multiwall Carbon Nanotubes and with Chitin, 18th Annual Bio-Environmental Polymer Society Meeting, Toronto, ON, Oct. 13-15, 2010
  12. Tong, L., Rizvi, R., and Naguib H.E., Effect of Processing Parameters on the Morphology of Melt Drawn Polylactide-Multiwall Carbon Nanotubes, ASME Smart Materials, Adaptive Structures and Intelligent Systems 2010, Paper No. 3774, Philadelphia, Sept. 2010.
  13. Rizvi, R., Makaremi, S., and Naguib, H.E., Characterization of the Piezoresistive Behavior of Polydimethylsiloxane-Multiwall Carbon Nanotube Composites, ASME Smart Materials, Adaptive Structures and Intelligent Systems 2010, Paper No. 3777, Philadelphia, Sept. 2010.
  14. Chan, C., Chang, S., and Naguib, H.E. A Parametric Study and Characterization of Porous, Non-Permeable, and Conductive PEGDA-HEMA Hydrogels, ASME 2010 Conference on Smart Materials, Adaptive Structure and Intelligent Systems, Philadelphia PA, Sept 28 – Oct 1, 2010.
  15. Wang, J., Naguib, H.E., and Bazylak, A. Investigation of Electroactive Polymers for the PEMFC GDL, Proceedings of the ASME 2010 Eighth International Fuel Cell Science, Engineering and Technology Conference FuelCell2010, Brooklyn NY, June 14-16, 2010.
  16. Jung, D.W., Lee, E.K., Park, C.B., and Naguib, H.E. Study on Steam Chest Molding Process for EPP bead foam, SPE ANTEC Technical Papers, Orlando Fl, May 16-20, 2010.
  17. In, E. and Naguib H E., Fabrication And Characterization Of Polymer-based Silica Aerogel, SPE ANTEC Technical Papers, Orlando Fl, May 16-20, 2010.
  18. Rizvi, R. and Naguib, H.E. Fabrication of Solid and Porous Melt Blended Polylactide-Chitin Composites, SPE ANTEC Technical Papers, Orlando Fl, May 16-20, 2010.
  19. Jo, C., In, E., and Naguib, H.E. Fabrication and characterization of ionic polymer gel actuators. SPIE Smart Structures/NDE 2010, Paper Number: 7644-45, San Diego CA USA, Mar. 7-11, 2010.
  20. Price, A D, Naguib, H E., and Ben Amara, F. Development of a deformable mirror based on conductive polymer actuator arrays for use in adaptive optics, SPIE Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring: Electroactive Polymer Actuators and Devices (EAPAD) XII, Vol. 7642, 7642-90, San Diego, March 7 – 11, 2010.
  21. Leung, L., DiRosa, A., and Naguib, H.E. Physical and mechanical properties of poly(?-caprolactone) – hydroxyapatite composites for bone tissue engineering applications, ASME IMECE 2009. Paper Number: 11273, Lake Buena Vista FL USA, Nov. 13-19, 2009.
  22. Chan, C., Zhang, W., Naguib, H.E. Development and characterization of novel conductive polypyrrole-polylactic acid open-porous composites. ASME Congress IMECE2009-11289 Lake Buena Vista, Florida November 13-19, 2009.
  23. Rizvi, R., Czekanski, A., and Naguib, H.E. Characterization and FEA based optimization of elastomeric components for automotive applications. ASME Congress IMECE2009-11289 Lake Buena Vista, Florida November 13-19, 2009.
  24. Leung, L., Hariri, S., Ma, W., and Naguib, H.E. Fabrication and characterization of electrospun poly(D,L-lactide-co-glycolide) acid bioscaffolds for bone repair applications. Biofoams 2009. Niagara Falls ON Canada, Oct. 27-28, 2009.
  25. Rizvi, R., Cochrane, B., and Naguib, H.E. Fabrication of solid and porous melt blended polylactide-chitin composites. Biofoams 2009. Niagara Falls ON Canada, Oct. 27-28, 2009.
  26. Chan, C., Chan, E., Zhang, W., Naguib, H.E. Comparison Of Novel Conductive Open- And Closed-Porous PPy-PLA Blends. ASME – SMASIS2009-1312 Oxnard, California September 20-24, 2009.
  27. Rizvi, R., Kim, J.-K., and Naguib, H.E. Processing and MWNT composition effects on the thermal, electrical and mechanical properties of PLA-MWNT composites. ASME-SMASIS2009-1312 Oxnard, California September 20-24, 2009.
  28. Rizvi, R. and Naguib, H.E. Novel polyethylene carbon nanotube porous composites. Foams 2009 TopCon, 7th International Conference Proceedings, Iselin, Sept. 14-17, 2009.
  29. Leung, E. Turner, and H.E. Naguib, Viscoelastic and mechanical properties of gas-foamed poly(?-caprolactone) bioscaffolds, Society for Biomaterials 2009 Annual Meeting, 2009.
  30. Price, A. and Naguib, H.E. Optimization of porous membrane core morphology for polypyrrole trilayer actuators, SPIE Smart Structures/NDE 2009. Paper Number: 7287-54, San Diego CA USA, Mar. 8-12, 2009.
  31. Chan, C., Chan, E., and Naguib, H.E. Development and characterization of porous polypyrrole-polylactic acid electroactive blends, SPIE Smart Structures/NDE 2009, Paper Number: 7287-39, San Diego CA USA, Mar. 8-12, 2009.
  32. Jo, C., Naguib, H.E., and Kwon, R.H. Modeling and optimization of ionic polymer gel actuators, SPIE Smart Structures/NDE 2009, Paper Number: 7287-34, San Diego CA USA, Mar. 8-12, 2009.
  33. Rizvi, R., Cochrane, B., and Naguib, H.E. Foaming behavior of melt blended polylactide-chitin composites. SPE ANTEC Technical Papers, Chicago IL, Jun. 22-24, 2009.
  34. Lee, E.K., Lee, K.M., Jung, P.U., Naguib, H.E., and Park, C.B. Comparison of random and block polypropylene copolymers in extrusion foaming. SPE ANTEC Technical Papers, Chicago IL, Jun. 22-24, 2009.
  35. Zhai, W.T., Leung, S.N., Naguib, H.E., and Park, C.B. Preparation of microcellular poly(ethylene-co-octene) rubber foam using supercritical CO2 technology. SPE ANTEC Technical Papers, Chicago IL, Jun. 22-24, 2009.
  36. Rizvi, R., and Naguib, H.E. Synthesis and characterization of LDPE-carbon nanotube composite foams. Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS2008), SMASIS2008-444 (5pp). Ellicott City MD, Oct. 28-30, 2008.
  37. Campbell, J.E., Hibbard G.D., and Naguib, H.E. Design, fabrication and mechanical characterization of pyramidal periodic cellular metal/polyurethane foam hybrid materials. Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS2008), SMASIS2008-318 (9pp). Ellicott City MD, Oct. 28-30, 2008.
  38. Chan, C., Wu, A., and Naguib, H.E. Synthesis and electromechanical characterization of polypyrrole bi-layer thin porous films. Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS2008), SMASIS2008-459, Ellicott City MD, Oct. 28-30, 2008.
  39. McRae, J., Naguib, H.E., and Attala, N. Mechanical and acoustic performance of compression molded open cell polypropylene foams. Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS2008), SMASIS2008-447 (8pp), Ellicott City MD, Oct. 28-30, 2008.
  40. Simkevitz, S.L., and Naguib, H.E. Development of two part porous shape memory polymer nanocomposites. Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS2008), SMASIS2008-519 (8pp), Ellicott City MD, Oct. 28-30, 2008.
  41. Rizvi, R., Khan, M.O., and Naguib, H.E. Synthesis and characterization of PLA-multiwall carbon nanotube composite foams. Foams 2008 TopCon, 6th International Conference on Foam Processing and Technology, Charlotte NC, Sept. 10-11, 2008.
  42. Price, A., Liu, C.C., O’Shaughnessy, C., and Naguib, H.E. Characterization, modeling, and application of conductive polymer trilayer actuators for biomimetic robotics. CANSMART 2008 International Workshop Smart Materials and Structures. Montreal QC, Oct. 23-24, 2008.
  43. (Invited) Leung, L., and Naguib, H.E. Modelling on the mechanical properties of PLGA bioscaffolds under compression. Blowing Agents and Foaming Processes 2008. Berlin, May 20-21, 2008.
  44. (Invited) In, E., Leung, L., and Naguib, H.E. In vitro biodegradation behaviour of poly(D,L-lactide-co-glycolide) 75/25 bioscaffolds with different pore morphology. CSME Symposium. Ottawa ON, Jun. 5-8, 2008.
  45. (Invited) Wu, A., Chan, C., and Naguib, H.E. Electrochemical synthesis and characterization of polypyrrole films doped with lithium perchlorate. CSME Symposium. Ottawa ON, Jun. 5-8, 2008.
  46. Azdast, T., Lee, E.K. Lee, K-M., Park, C.B., Naguib, H.E., Behravesh, A.H., Pachner, E., and Praller, A. Extrusion foaming of high-melt-strength PP with supercritical carbon dioxide I: cell nucleation behaviors. SPE ANTEC Technical Papers. 997-1002. Milwaukee WI, May 4-8, 2008.
  47. Lee, K.M. Lee, E.K., Kim, S.G., Park, C.B., and Naguib, H.E. Bi-cellular polystyrene foam using water and n-butane. SPE ANTEC Technical Papers. 1920-1924, Milwaukee WI, May 4-8, 2008.
  48. Zhu, W.L., Lee, E.K., Wan, E., Wong, A., Wu, Q.F., Park, C.B., Naguib, H.E., and Zhou, N.Q. Analysis of cell nucleation and morphology of batch-foamed polypropylene copolymer/poly(dimethylsiloxane) with CO2. SPE ANTEC Technical Papers. 973-977, Milwaukee, WI, May 4-8, 2008.
  49. Leung, L., Baek, S., and Naguib, H.E. The effects of PLGA composition on morphology and mechanical properties of bioscaffolds. SPE ANTEC Technical Papers. 553-557. Milwaukee WI, May 4-8, 2008.
  50. Wong, S., Lee, J., Naguib, H.E., and Park, C.B. Mechanical properties of injection molded thermoplastic polyolefin (TPO) cellular foams. SPE ANTEC Technical Papers. 1044-1048, Milwaukee WI, May 4-8, 2008.
  51. Richards, E., Rizvi, R., Chow, A., and Naguib, H.E. Synthesis and physical characterization of biodegradable PLA/PHBV foams. SPE ANTEC Technical Papers. 1603-1608, Milwaukee MI, May 4-8, 2008.
  52. Chu, R.K.M., Naguib, H.E., and Attala, N. Synthesis and characterization of open-cell foams for sound absorption using rotational molding method. SPE ANTEC Technical Papers. 1029-1033, Milwaukee WI, May 4-8, 2008.
  53. Jo, C. and Naguib, H.E. Effect of crystallinity on the cell morphology and mechanical properties of HDPE/clay nanocomposite foams, SPE ANTEC Technical Papers. 1902-1909, Milwaukee WI, May 4-8, 2008.
  54. Simkevitz, S.L. and Naguib, H.E. Manufacturing and characterization of novel porous two-part shape memory polymer. SPE ANTEC Technical Papers. 2539-2545, Milwaukee, WI, May 4-8, 2008.
  55. McRae, J., Naguib, H.E., and Attala, N. Acoustic performance and compression behaviour of perforated aluminium foam. SPIE Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring. 6929: 69290W, San Diego CA, Mar. 9-13, 2008.
  56. Price, A. and Naguib, H.E. Porous conductive polyblends of polyaniline in poly(methyl methacrylate). SPIE Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring. 6927: 69271U. San Diego CA, Mar. 9-13, 2008.
  57. (Invited) Price, A., Berndt, C.S., Deluca, J.M., Farra, N., Gillies, A.G., Kopec, M.O., and Naguib, H.E. Synthesis and evaluation of ionic electroactive polymer actuators. CANSMART conference. 10p, Montreal QC, Oct. 10-11, 2007.
  58. (Invited) Leung, L., Chan, C., Song, J., Tam, B., and Naguib, H.E. Effects of cell morphology on in-vitro degradation of PLGA 50/50 scaffolds. BioFoams 2007. Capri Italy, Sept. 26-28, 2007.
  59. (Invited) Perron, J., Naguib, H.E., Daka, J., and Chawla A., Development and characterization of porous PLGA 85/15 scaffold for tissue engineering applications. Blowing Agents 2007. Frankfurt Germany, May 22-23, 2007.
  60. Leung, L., Chan, C., Song, J., Tam, B., and Naguib, H.E. A parametric study on the processing and characterization of PLGA 50/50 bioscaffolds. SPE ANTEC Technical Papers. Cincinnati OH, May 6-10, 2007.
  61. Zhen, X., Lee, R., Park, C.B., Pop Illiev, R. and Naguib, H.E. A study on the sorption and desorption of pentane in PP and PET. SPE ANTEC Technical Papers. Cincinnati OH, May 6-10, 2007.
  62. Wong, S., Naguib, H.E., and Park, C.B. Effects of processing parameters on the cellular morphology and mechanical properties of mineral-filled thermoplastic polyolefin microcellular foams. SPE ANTEC Technical Papers. 2067-2071, Cincinnati OH, May 6-10, 2007.
  63. Zhang, X., Zhu, Z., Park, C.B., Lee, E.K., Chen, N., and Naguib, H.E. Study on the sorption and desorption of N-pentane in polystyrene and polypropylene. SPE ANTEC Technical Papers. 3011-3015, Cincinnati OH, May 6-10, 2007.
  64. Price, A., Chen, W., and Naguib, H.E. Synthesis and characterization of porous polyaniline conductive polymers. SPIE Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring. 6524: 65240V, San Diego CA, March 18-22, 2007.
  65. Simkevitz, S.L. and Naguib, H.E. Effects of density and cell morphologies on the shape memory effect of a porous shape memory polymer. SPIE Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, Proceedings of SPIE. 6525: 65250U, San Diego CA, March 18-22, 2007.
  66. (Invited) Leung, L., Perron, J., and Naguib, H.E. Constitutive modeling for porous PLGA 85/15 scaffold in compression. 2006 ASME International Mechanical Engineering Congress and Exposition (IMECE2006)-Materials, 6p, Chicago IL, Nov. 5-6, 2006.
  67. (Invited) Wong, S., Naguib, H.E., and Park, C.B., Effect of processing parameters on the cellular morphology and mechanical properties of thermoplastic polyolefin (TPO) microcellular foams. 2006 ASME International Mechanical Engineering Congress and Exposition (IMECE2006)-Materials. 10p, Chicago IL, Nov. 5-6, 2006.
  68. (Invited) Jo, C. and Naguib, H.E. Effect of nanoclay and processing conditions on the cell morphology and mechanical properties of HDPE/clay nanocomposite foams. Foams 2006 Proceedings. 134-140, Chicago IL USA, Sept. 13-14, 2006.
  69. Jo, C., Fu, J., and Naguib, H.E. Modeling of the effect of intercalated clays on the tensile properties of PMMA/clay nanocomposite foams. ANTEC 2006 Technical Papers. 700-706, Charlotte NC, May 7-11, 2006.
  70. Perron, J., Naguib, H.E., Daka, J., and Chawla A., Parametric study to optimize the processing parameters and the physical properties of porous PLGA 85/15 scaffold. ANTEC 2006 Technical Papers. 1371-1375, Charlotte NC, May 7-11, 2006.
  71. Hu, X., Nawaby, A.V., Naguib, H.E., Day, M., Ueda, K., and Liao, X. Physical and structural changes in PLA-nanocomposite/CO2 system. ANTEC 2006 Technical Paper. 238-242. Charlotte NC, May 7-11, 2006.
  72. Price, A., Jnifene, A., and Naguib, H.E. Biologically inspired anthropomorphic arm and dextrous robot hand actuated by smart-material-based artificial muscles. SPIE Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring. 6173: 61730X, San Diego CA, Feb. 26 – Mar. 2, 2006.
  73. (Invited) Simkevitz, S.L. and Naguib, H.E. A study on the thermomechanical behaviour of a two part resin system shape memory polymer. CANSMART 2006. Toronto ON, Oct. 12-13, 2006.
  74. (Invited) Edgerton, A., Price, A., Naguib, H.E., and Jnifene, A., A study on the characterization and mechanical design of shape memory alloys based actuators used in artificial muscles. CSME Forum, 8p, Kananaskis AB, May 21-24, 2006.
  75. (Invited) Minkoff, A. and Naguib, H.E. FEA for weld metal deposition process on boiler tubes. CSME Forum, 7p, Kananaskis AB, May 21-24, 2006.
  76. (Invited) Attala, Y., Attala, N., Fu, J., and Naguib, H.E. The effect of processing parameters on the acoustical efficiency of open-cell PMMA materials. SAE 2006 World Congress, 06AC-82 Detroit, 2006.
  77. Hu, X., Nawaby, A.V., Naguib, H.E., Day, M. Ueda, K., and Liao, X. Polylactic acid (PLA)-CO2 foams at sub-critical conditions. ANTEC 2005 Technical Papers. 7: 187-190, Boston MA, May 1-5, 2005.
  78. Fu, J., Jo, C., and Naguib, H.E. The effect of the processing parameters on the mechanical properties of PMMA microcellular foams. ANTEC 2005 Technical Papers. 50: 2616-2621, Boston MA, May 1-5, 2005.
  79. (Invited) Manninnen, A., Naguib, H.E., Nawaby, A.V., Liao, X., and Day, M. Effect of clay content on the thermal and physical characteristics of PMMA nanocomposite foams. Foams 2004 Proceedings. 95-100, Wilmington DE, Oct. 6-7, 2004.
  80. Lee, P.C., Naguib, H.E., Park, C.B., and Wang, J. Increase of open-cell content by plasticizing the soft regions with a secondary blowing agent, SPE ANTEC Technical Papers. 49: 2626-2630, Chicago IL, May 16-20, 2004.
  81. Manninnen, A., Naguib, H.E., Nawaby, A.V., and Day, M. Kinetics of gas sorption and diffusion in polymer-clay nanocomposites. ANTEC Technical Papers. 49: 2515-2520, Chicago IL, May 16-20, 2004.
  82. (Invited) Manninnen, A., Naguib, H.E., Nawaby, A.V., and Day, M. PMMA nanocomposite fabrication & thermal transitions. 16th Canadian Materials Science Conference. pp. 32, Ottawa ON, Jun. 5-8, 2004.
  83. (Invited) Park, C.B., Padareva, V., Lee, P.C., and Naguib, H.E., Extruded open-celled LDPE-based foams using supercritical CO2. Polymer-Supercritical Fluid Systems and Foams Conference, Tokyo, Japan, 204, Dec. 4-5, 2003.
  84. (Invited) Naguib, H.E., Wang, J., Park, C.B., Mukhopadhyay, A.K., and Reichelt, N. Effect of recycling on the MW, rheological properties, and foaming behaviors of branched PP. PPS-19, Melbourne, Australia, paper # 1058, July 7-10, 2003.
  85. (Invited) Padareva, V., Park, C.B., Lee, P.C., and Naguib, H.E., Filamentary extrusion of open-celled low density polyethylene (LDPE) and low density polyethylene/polystyrene (LDPE/PS) foams using melt structure non-homogeneity and processing temperature control. PPS-19, Melbourne, Australia, paper # 1045, July 7-10, 2003.
  86. Naguib, H.E., Park, C.B., Lee, P.C., Xu, D., and Reichelt, N. Effect of talc on the volume expansion behavior of extruded PP foams. SPE ANTEC Technical Papers. 48: 1817-1822, 2003.
  87. (Invited) Naguib, H.E. and Park, C.B., Fundamental governing mechanisms for volume expansion of extruded polypropylene foams. Key note paper, Regional PPS Meeting, Taipei, Taiwan, 2002.
  88. (Invited) Naguib, H.E., Yoon, E.Y., Park, C.B., and Reichelt, N. Fundamental foaming mechanisms governing the volume expansion of extruded polypropylene foams. Foams 2002 Proceedings. 133-139, Houston, Texas, 2002.
  89. (Invited) Naguib, H.E., Park, C.B., Wang, J., Mukhopadhyay, A.K., and Reichelt, N. Effect of recycling on the rheological properties and foaming behaviors of branched PP. Blowing Agents and Foaming Processes. 20, Heidelberg, Germany, May 27-28, 2002.
  90. (Invited) Naguib, H.E., Yoon, E.Y., and Park, C.B. Fundamental governing mechanisms for volume expansion of extruded propylene foams. Regional PPS Meeting, Antalia, Oct. 2001.
  91. Naguib, H.E., Xu, X., Richards, E.V., and Park, C.B. Measurement of the PVT properties of propylene/butane solutions. Polymer Processing Society-17, Montreal, May 2001.
  92. (Invited) Naguib, H.E., Park, C.B., Hesse, A., Panzer, U., and Reichelt, N. Strategies for achieving fine-celled low-density polypropylene foams. Blowing Agents and Foaming Processes. 7, 9p, Frankfurt, 2001.
  93. Naguib, H.E., Xu, J.X., and Park, C.B. Effects of blending on the foamability of branched propylene materials. SPE ANTEC Technical Papers. 47:1623-1630, 2001.
  94. Naguib, H.E., Richards, E.V., Pop-Iliev, R., Xu, J.X., and Park, C.B. Measurement of the swelling of PP with dissolved butane. SPE ANTEC Technical Papers. 47: 1537-1545, 2001.
  95. (Invited) Naguib, H.E., Pop-Iliev, R., Xu, J.X., Richards, E.V., and Park, C.B. Measurement and modeling of the PVT properties of propylene/butane solutions. PPS-17 Meeting, Montreal, 2001.
  96. Park, S.S., Park, C.B., Ladin, D., Naguib, H.E., and Tzoganakis, C. Measurement of the PVT properties of a polymer/gas solution using a foaming extruder and a gear pump. SPE ANTEC Technical Papers. 46: 1978-1986, 2000.
  97. Ladin, D., Park, C.B., Park, S.S., and Naguib, H.E., Measurements and modeling of the rheological properties of biodegradable PBS/carbon dioxide solutions. SPE ANTEC Technical Papers. 46: 1955-1977, 2000.
  98. Naguib, H.E., Song, S.-W., Park, C.B., and Byon, Y.J. Effect of supercritical carbon dioxide and nitrogen on crystallization of linear and branched propylene resins filled with foaming agents. SPE ANTEC Technical Papers. 46: 1867-1873, 2000.
  99. Naguib, H.E. and Park, C.B. A study of melt fracture of linear and branched propylene/butane solutions with foaming additives. SPE ANTEC Technical Papers. 46: 1025-1031, 2000.
  100. Naguib, H.E. and Park, C.B. Challenge to the production of low-density propylene foams in extrusion. Foams 2000 Proceedings, Parsippany, New Jersey, pp. 149-161, 2000.
  101. Park, S.S., Park, C.B., Ladin, D., Naguib, H.E., and Tzoganakis, C. On-line measurement of polymer melt specific volume using a gear pump. SPE ANTEC Technical Papers. 45: 2471-2478, 1999.
  102. Lee, M., Park, C.B., Tzoganakis, C., and Naguib, H.E., Comparison of various viscosity models for PS/CO2 solutions. SPE ANTEC Technical Papers. 45: 1241-1426, 1999.
  103. (Invited) Park, C.B., Liu, Y., and Naguib, H.E., Challenge to forty-fold expansion of biodegradable polyester foams. Foams ’99 Proceedings. Parsippany, New Jersey, pp. 35-51, 1999.
  104. HaoTian Harvey Shi; Hani E. Naguib, Layered conductive polymer on nylon membrane templates for high performance, thin-film supercapacitor electrodes, SPIE. 9800, Behavior and Mechanics of Multifunctional Materials and Composites 2016, 98000K. (April 18, 2016) doi: 10.1117/12.2222007
  105. Yu-Chen Sun; Benjamin Leaker; Hani E. Naguib, Development of eletrothermal actuator (ETA) with low activation voltage, SPIE. 10165, Behavior and Mechanics of Multifunctional Materials and Composites 2017, 101650Q. (April 11, 2017) doi: 10.1117/12.2263610
  106. Rizvi; A. Anwer; H. Naguib, Multifunctional surfaces produced using fiber debonding and pullout in composite materials, Proc. SPIE. 10165, Behavior and Mechanics of Multifunctional Materials and Composites 2017, 101650X. (April 11, 2017) doi: 10.1117/12.2264631
  107. Ghaffari Mosanenzadeh, S, Vadhari Ali, Naguib H E., Park C B, on the structure and properties of flexible open-cell polyurethane foams, SPE Foams Topcon conference 2016, Seattle 2016.
  108. Kshad M. A, and Naguib H E, Development of novel polymeric metamaterials based on origami foamed structures, SPE Foams Topcon conference 2016, Seattle 2016.
  109. Kyle Eastwood, Hamidreza Azimian, Brian Carrillo, Thomas Looi, Hani E. Naguib, James Drake, Kinetostatic Design of Asymmetric Notch Joints for Surgical Robots, Submission number: 1155, 2016 IEEE/RSJ International Conference on Intelligent Robots and Systems
  110. (Invited) Kshad M. A, and Naguib H E, Characterization of Origami Shape Memory Metamaterials (SMMM) Made of Bio Compatible Polymers, Paper S19-587, Polymer Processing Society Meeting PPS 32, Lyon France July 25 to 29, 2016.
  111. Khalili N, Kwon R.H., Naguib, H.E. , Conducting polymer hydrogels (CPHs) for electronic skin applications S19-585, Polymer Processing Society Meeting PPS 32, Lyon France July 25 to 29, 2016.
  112. Sun Y. C., Shi H. T., and Naguib, H. E., Fabrication and characterization of β-poly(vinylidene fluoride)/silanetreated titanium dioxide dielectric nano-composites. SPIE Smart Structures NDE Conference. [9800-23] March 20-24 2016, Las Vegas, NV, USA
  113. Khalili, H.E. Naguib, R.H. Kwon, “Development, fabrication, and multiobjective optimization of highly sensitive conjugated polymer based piezoresistive sensors in electronic skin applications,” Proceedings of SPIE, Behavior and Mechanics of Multifunctional Materials and Composites, 9800-50, Las Vegas, 2016.
  114. Shi H T, Naguib H  E, Fabrication and characterization of layered conductive polymer on nylon membrane templates for high performance, thin-film supercapacitor electrodes, manuscript 9800-19, SPIE Smart Structures/NDE, 20 – 24 March 2016, Las Vegas, Nevada, United States
  115. Mohamed Ali E. Kshad; Hani E. Naguib, Characterization of origami shape memory metamaterials (SMMM) made of bio-polymer blends, SPIE. 9800, Behavior and Mechanics of Multifunctional Materials and Composites 2016, 98000H. (April 18, 2016) doi: 10.1117/12.2222093
  116. Kshad M. A. and Naguib H E., Characterization of Origami Shape Memory Metamaterials (SMMM) Made of Bio Compatible Polymers, manuscript S19-587, 32nd International Conference of the Polymer Processing Society (PPS-32) July 25-29. Lyon, France
  117. Sun Y-C, Shi H T, Naguib H E,  Fabrication of polymer and carbon nanotubes based artificial muscles through controlled electrospinning processes, manuscript S19-584, 32nd International Conference of the Polymer Processing Society (PPS-32) July 25-29. Lyon, France
  118. Khalili N, Naguib H, Kwon R, Conducting polymer hydrogels (CPHs) for electronic skin applications, manuscript S19-585, 32nd International Conference of the Polymer Processing Society (PPS-32) July 25-29. Lyon, France
  119. Li S. C.Y, Sun Y-C, Naguib H E, Guan Q, Characterization of chitin nanowhisker reinforced polypropylene biocomposites, 14th International Symposium on Bioplastics, Biocomposites & Biorefining: Sustainable Bioeconomy to Marketplace May 31 to June 03, 2016 taking place in Guelph, Ontario, Canada.
  120. Anwer A. S. M, and Naguib H E., Improvement of the Properties of PLA with Filler Incorporation, 14th International Symposium on Bioplastics, Biocomposites & Biorefining: Sustainable Bioeconomy to Marketplace May 31 to June 03, 2016 taking place in Guelph, Ontario, Canada.
  121. Ghaffari, S. Narkedamali V, Naguib H E and Park CB, Application of Air Gap To Enhance Acoustic Performance Of Bio-Based PLA Foams, manuscript 368, Society of Plastics Engineers (SPE) Annual Technical Conference ANTEC 2016, May 23-25, 2016. Indianapolis Indiana , USA
  122. Anwer A.S. M and Naguib H E.,  Improving the Impact Properties of PLA by Incorporation of PHA, TPU and Carbon Nanofibers, manuscript 446, Society of Plastics Engineers (SPE) Annual Technical Conference ANTEC 2016, May 23-25, 2016. Indianapolis Indiana ,  USA
  123. Al Jawhari F, and Naguib H E., Microstructure-Property Relationship for Impact Energy Absorption of Functionally Graded Porous Structures of Acrylonitrile Butadiene Styrene (ABS), manuscript 288, Society of Plastics Engineers (SPE) Annual Technical Conference ANTEC 2016, May 23-25, 2016. Indianapolis Indiana ,  USA
  124. Ramdan S., Narrinder P, and Naguib H E, Dynamic and Static Tensile Mechanical Properties of Myocardial Tissue, 10th World Biomaterials Congress, Montreal, May 17-22, 2016
  125. Wang, S., Kazemi, Y, Kong T., Ameli, A, Park CB, and Naguib H E, Decoupling The Effects Of Cell Size And Relative Density On Electrical Conductivity In Polystyrene/MWCNT Nanocomposite Foams, SPE Foams Topcon conference 2015, Kyoto 2015.
  126. Sun, Y. C, Terakita D., and Naguib H E., Fabrication Of Pvdf Based Thermoelectric Foam Via Temperature Elevated Super Critical Carbon Dioxide Batch Foaming Method, SPE Foams Topcon conference 2015, Kyoto 2015.
  127. Sun, Y C, Wang Y K., and Naguib H E, Sun, Y. C., Wang, Y., and Naguib, H. E. (2015) Study of the thermoelectric performance of GNP/PVDF and MWCNT/PVDF composites fabricated via melt blending method, Society of Plastics Engineers (SPE) Annual Technical Conference ANTEC, March 23-25, 2015. Orlando, Florida, USA
  128. Wang S, Ameli A, Kazemi Y, Yu K J, Park C B, Naguib H E, Controlled Foaming of Polystyrene MWCNT by Carbon Dioxide, Society of Plastics Engineers (SPE) Annual Technical Conference ANTEC, March 23-25, 2015. Orlando, Florida, USA
  129. Rizvi R., Dutta T, Fernie G, Song H, and Naguib H E, Compliant High Friction Surfaces for Ice Made Using Polymer Fiber Composites, Society of Plastics Engineers (SPE) Annual Technical Conference ANTEC, March 23-25, 2015. Orlando, Florida, USA
  130. Ghaffari, S. Liu M. W., Palhares H. G., Naguib H E, Study the Effect of hBN Fibre Content and Aspect Ratio on PLA Based Composite Thermal Conductivity, paper no. 2097423, Society of Plastics Engineers (SPE) Annual Technical Conference ANTEC, March 23-25, 2015. Orlando, Florida, USA
  131. Shi H. T., Dumas J., Bonnevide M., Naguib H. E., A Study on the Effect of Twin-Screw Melt Blended Nano-Fillers on Polypropylene Nanocomposite Hybrid Electrical and Morphological Properties for Supercapacitor Applications, Paper No. 2097479, Society of Plastics Engineers (SPE) Annual Technical Conference ANTEC, March 23-25, 2015. Orlando, Florida, USA
  132. Ghaffari Mosanenzadeh, S., Naguib H E., Park C B, and Atalla N., Microstructural Design Of Porous Membrane For Effective Sound Absorption Performance” paper No. 2098142, Society of Plastics Engineers (SPE) Annual Technical Conference ANTEC, March 23-25, 2015. Orlando, Florida, USA
  133. Khalili N, Naguib H. E., and Kwon R, Transmission Line Circuit model for  Polypyrrol -based Mechanical Sensors, paper No. 9430-86, SPIE Smart Structures/NDE, March 8-12, 2015, San Diego, California, USA
  134. Shi H. T., Naguib H. E., Fabrication and Characterization of Polyaniline-based Nanocomposite Electrodes for Lightweight, Flexible, High Performance Hybrid Supercapacitor Applications, paper No. 9432-36, SPIE Smart Structures/NDE, March 8-12, 2015, San Diego, California, USA
  135. Sun, Y. C., Terakita, D., Tseng, A.C., and Naguib, H. E. (2015) Study of the thermoelectric performance of GNP/PVDF and MWCNT/PVDF composite fabricated through melt blending method. SPIE Smart Structures NDE Conference. [9432-8] San Diego, CA, USA
  136. Al Jahwari F and Naguib H E. , Viscoelastic Modeling and Validation of Functionally Graded Heterogeneous Porous PLA Structures with a C1-Continuous Plate Theory and Novel Homogenization, SPE Foams Topcon conference 2014, Iselin NJ.
  137. Lee Ka yeung Terence , Naguib Hani E, Lian Keryn, Multiwall Carbon nano-tubes/conductive polymer composite for supercapacitor applications, ASME SMASIS 2014 Newport September 2014.
  138. Anwer M. and Naguib H E., Development and Characterization of Polylactide Based Bio-Composites submitted to the ASME IMECE2014-39261 Montreal 2014
  139. Al Jahwari F and Naguib H E. , Experimental and Numerical Analysis on the Buckling Behavior of Functionally Graded Porous Media with Extension-Capable C1 Higher Order Plate Theory, IMECE2014-39090, Montreal 2014
  140. Ghaffari Mosanenzadeh, H.E. Naguib, C.B. Park, and N. Atalla, Biobased Graded Foams For Acoustic Applications, Proceedings of The Canadian Society for Mechanical Engineering International Congress 2014, June 1-4, 2014, Toronto, Ontario, Canada
  141. Eastwood, T. Looi, H. E. Naguib and J. M. Drake, “Fluidic Actuators for Minimally Invasive Neurosurgical Instruments” in Hamlyn Symposium on Medical Robotics, vol. 9, 2014, p. 75.
  142. Ghaffari Mosanenzadeh S., Naguib H E., Highly Thermal Conductive Bio-based Polymers, proceedings of The Canadian Society for Mechanical Engineering International Congress 2014, June 1-4, 2014, Toronto, Ontario, Canada
  143. Ghaffari Mosanenzadeh S., Naguib H E., Effect of matrix on thermal conductivity of high thermally conductive polymeric composites for electronic packaging applications, The Polymer Processing Society 30th Annual Meeting June 8-12, 2014, Cleveland, Ohio, USA.
  144. Al Jahwari F, Naguib H E, An Accurate Hierarchical Higher Order Plate Theory for Tailoring the Properties of Functionally Graded Porous Media, The Polymer Processing Society 30th Annual Meeting June 8-12, 2014, Cleveland, Ohio, USA.
  145. Song J J. , Naguib H E, Development of multifunctional shape memory polymer foams, The Polymer Processing Society 30th Annual Meeting June 8-12, 2014, Cleveland, Ohio, USA.
  146. In, E, and Naguib H E., Fabrication and Characterization of Silica Aerogel as synthetic tissues for medical imaging phantom, Paper S12-152, PPS-30, The Polymer Processing Society 30th Annual Meeting June 8-12, 2014, Cleveland, Ohio, USA.
  147. Guan Q., Naguib H E, “Development and characterization of bio-based PA composites for electronic packaging applications using micro fillers, Society of Plastics Engineers, SPE Annual Technical Conference ANTEC 2014, Technical Papers, Paper # 1871469, April 28–30, 2014. Las Vegas, Nevada, USA
  148. Ghaffari Mosanenzadeh, S., Zhou, Y, Gengyu Xu, G., Leung, S. N.,  Naguib H E, “Development and characterization of bio-based PA composites for electronic packaging applications using micro fillers, Society of Plastics Engineers, SPE Annual Technical Conference ANTEC 2014, Technical Papers, Paper # 1871534, April 28–30, 2014. Las Vegas, Nevada, USA
  149. Khalili N., Naguib H. E., Kwon R. H., On the geometrical and mechanical multi-aspect optimization of PPy/MWCNT actuators, paper No. 9056-65, SPIE Smart Structures/NDE 2014, San Diego CA USA, 2014.
  150. Song J. J., Naguib H. E., Fabrication and characterization of a foamed polylactic acid (PLA)/ thermoplastic polyurethane (TPU) shape memory polymer (SMP) blend for biomedical and clinical applications, Paper No.9058-11, SPIE Smart Structures/NDE 2014, San Diego CA USA, 2014.
  151. Keryn Lian, Han Gao, Kayeung Lee, Haoran Wu, Matthew Genovese, Hani Naguib, paper# 632: A Comparative Study of Solid Pseudocapacitive Electrochemical Capacitors by 224th ECS Meeting in San Francisco, California October 27-November 1, 2013.
  152. Guan Q., Naguib H E, Development of Biobased PLA, PHBV and Chitin Nanowhiskers Composites Foam, Top Con Foams 2013 conferences September 11, 12, Seattle, USA 2013.
  153. Kayeung Lee, K., Naguib H E. and Lian, K., Flexible Multiwalled Carbon nanotube/Polyaniline composite electrode for supercapacitor application, ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2013, Snowbird, Utah, USA, September 16-18, 2013.
  154. Rizvi, R., Naguib, H E., Correlation of Rheological and Electrical Filler-Network Evolution in PVDF-MWNT Piezoresistive Nanocomposites, SMASIS2013-3241, ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2013, Snowbird, Utah, USA, September 16-18, 2013.
  155. Khalili, N, Sun, Y. C, Naguib, H. E., Kwon, R. H. “Towards the Optimization of Conducting Polymer Actuators”, ASME conference on Smart Material, Adaptive Structures, and Intelligent Systems SMASIS 2013, Snowbird, Utah, USA, September 16-18, 2013.
  156. In E. and Naguib H E. , Development of Aerogels Foams For Medical Imaging, Biofoams Conference 2013, Toronto, 2013.
  157. Guan Q. and Naguib H E, Characterization Of Pla/Phbv Chitin Nanowhisker Foam, Biofoams Conference 2013, Toronto, 2013.
  158. Leung, S.N., and Naguib, H.E., “Modeling of Thermally Conductive Polymer Matrix Composite Foam,” 19th International Conference on Composite Materials, Montreal, QC, Canada, July 28-August 2, 2013.
  159. Leung, S.N., Khan, O.M., and Naguib, H.E., “Multifunctional Polymer Matrix Composites Based on Nanocarbons – Carbon Nanotubes and Graphene Nanoplatelets,” PPS-29, Nuremberg, Germany, July 15-19, 2013.
  160. Rizvi, R. Naguib, H.E. and Biddiss E., Piezoresistance Characterization of Porous TPU-MWNT Nanocomposites, PPS-29, Nuremberg, Germany, July 15-19, 2013.
  161. Ghaffari Mosanenzadeh, H.E. Naguib, C.B. Park, and N. Atalla, “Modeling the acoustic absorption behaviour of Polylactide open cell foams with bimodal structure for high acoustic absorption”, 21st International Congress on Acoustics, Montreal, Quebec, Canada, June 2-7, 2013.
  162. Leung S.N., Chan, E., Naguib H.E., and Dawson F., Thermally Conductive and Electrically Insulating hexagonal Boron Nitride-Filled Polyphenylene Sulfide Composites, SPE ANTEC Technical Papers 2013, Manuscript ID: 1590923 Cincinnati, OH, USA, April 22-24, 2013.
  163. Ghaffari Mosanenzadeh S., Naguib H.E., Park C.B., and Atalla N., Study on the Effect of Materials Elasticity on Acoustic Performance of Bio-based PLA and PHA Blend Foams, SPE ANTEC Technical Papers 2013, Cincinnati, OH, USA, April 22-24, 2013.
  164. Jahani D., Jung, P.U., Ameli A., Saniei M., Park C.B. and Naguib H., “Cavity-Integrated Injection Molded Acoustic Foams”, Society of Plastics Engineers, Annual Technical Conference, Technical Papers 2013, Paper # 1591565, Cincinnati, Ohio, April 21-24, 2013
  165. Jahani D., Ameli A., Cofreros A., Park C.B. and Naguib H., “Injection Foam Molding Of Highly Expanded Polycarbonate with Open-Cell Structure using Mold Opening”, Society of Plastics Engineers, Annual Technical Conference, Technical Papers 2013, Paper # 1591517, Cincinnati, Ohio, April 21-24, 2013
  166. Rizvi, R. Naguib, H.E. and Biddiss E., Development of piezoresistive PVDF-nanocomposites for strain sensing, SPIE Smart Structures/NDE 2013, San Diego CA USA, 2013.
  167. Leung S. N., H. E., ,Development of novel multifunctional biobased polymer composites with tailored conductive network of micro-and-nano fillers, Paper No. SSN04-32, SPIE Smart Structures/NDE 2013, San Diego CA USA, 2013.
  168. Lee Ka Yeung, Naguib H. E., Biddiss E., and Lian K., “The Application of Multiwall Carbon Nano-tubes/Polypyrrole Composite Electrode in Flexible Energy Storage System for Electronic Textile and Wearable Electronics, SMASIS2012-7986, ASME Smart Materials, Adaptive Structures and Intelligent Systems 2012, Stone Mountain GA, Sept. 2012
  169. Rizvi R., Naguib H. E., Biddiss E., “Characterization of a Porous Multifunctional TPU-MWNT Nano-composite for Pressure Sensing, SMASIS2012-8178, ASME Smart Materials, Adaptive Structures and Intelligent Systems 2012, Stone Moutain GA, Sept. 2012
  170. Rizvi, R. Naguib, H.E. and Biddiss E., Piezoresistivity of TPU MWCNT-nanocomposites foams, SPE TopCon FOAMS 2012 Barcelona Spain, 2012.
  171. Ghaffari Mosanenzadeh, H.E. Naguib, C.B. Park, and N. Atalla, “Development of Bio-based Foams with Improved Acoustic and Mechanical Performance”, Proceedings of the InterNoise ASME NCAD meeting, New York City, NY, USA, August 19-22, 2012.
  172. Leung S. N., Khan, M. O., Naguib, H. E., Dawson F., and Adinkrah, V., Fabricatoin of Thermoplastic Polymer-Matrix Composites for Thermally Conductive Heat Sink Insulating Pad, PPS Americas Conference 2012, Niagara Falls, Ontario, Canada, May 21-24, 2012.
  173. Mosanenzadeh S. G., Leung S. N., Naguib, H. E., Park C.B., and Atalla N., Fabrication and Characterization of Bio-based Composite Foams of PLA and PHA for Acoustic Applications, PPS Americas Conference 2012, Niagara Falls, Ontario, Canada, May 21-24, 2012.
  174. Khan, M. O., Leung S. N., Naguib, H. E., Dawson F., and Adinkrah, V., Tailored Electrical Conductivity of Thermally Conductive Polymer Composites Embedded with hBN-GNP Fillers for ULSI, Capacitors, and Electronic Packaging Materials, PPS Americas Conference 2012, Niagara Falls, Ontario, Canada, May 21-24, 2012.
  175. Rizvi, R. and Naguib, H.E., A Study on the Electrical Conduction and Piezoresistance of Polyethylene-Carbon nanotube and –Graphene Nanoplatelet Composites, PPS Americas Conference 2012, Niagara Falls, Ontario, Canada, May 21-24, 2012.
  176. Guan, Q., Rizvi, R., and Naguib, H.E., The effect of Polyhydroxybutyrate-co-valerate (PHBV) Content on Physical and Morphological Properties of Polylactic Acid (PLA) Foams, PPS Americas Conference 2012, Niagara Falls, Ontario, Canada, May 21-24, 2012.
  177. Khan M. O., Leung S. N., Naguib H E, Dawson F., and Adinkrah V., One- and three-dimensional alignment of graphene using new fabrication strategies for thermally conductive LLDPE-graphene composite, SPE-ANTEC Tech. Papers (2012), Orlando, USA April 2-4, 2012.
  178. Guan Q., Rizvi R., Naguib H.E., The effect of Polyhydroxybutyrate-co-valerate (PHBV) content on thermal, rheological, mechanical properties and foaming behavior of Polylactic Acid (PLA), SPE-ANTEC Tech. Papers (2012), Orlando, USA April 2-4, 2012.
  179. Ghaffari Mosanenzadeh S., Naguib H.E., Park C.B., and Atalla N., Development and Characterization of Environmentally Friendly Open-Cell Acoustic Foams, SPE-ANTEC Tech. Papers (2012) , Orlando, USA April 2-4, 2012.
  180. Jahani D., Ameli A., Park C. B., Naguib H., The Influence of Processing Temperatures and Nucleating Agent in Foaming of A Thin Walled Injection Molded Part, SPE-ANTEC Tech. Papers (2012), Orlando, USA April 2-4, 2012.
  181. In, E., Naguib, H E., Haider M., Development of Polymer Gel for MRI liver Phantom with lesion particles, ID: 1151723, SPIE Smart Structures/NDE 2012, San Diego CA USA Mar. 11-15, 2012
  182. Leung, S.N., Khan, M.O, Naguib, H.E., Dawson, F., and Adinkrah, V., Applications of multifunctional polymer-matrix composites in hybrid heat sinks, SPIE Smart Structures/NDE 2012, San Diego CA USA, Mar. 11-15, 2012
  183. Wang, J. Naguib H E and Bazylack A., Development of conductive fibrous polymer membrane, SPIE Smart Structures/NDE 2012, San Diego CA USA, Mar. 11-15, 2012
  184. Khan M. O., Chan E., Leung S. N. , Naguib H E, Dawson F., and Adinkrah V., Multifunctional liquid crystal polymeric composites embedded with grapheme nano platelets, SMASIS2011-5123, ASME Smart Materials, Adaptive Structures and Intelligent Systems 2011, Scottsdale AZ, Sept. 2011
  185. Rizvi R., Cochrane B.,, Naguib H. E, and Bidiss E., Effect of nanoparticle filler type on the piezoresistance of polyethylene composites, SMASIS2011-5136, ASME Smart Materials, Adaptive Structures and Intelligent Systems 2011, Scottsdale AZ, Sept. 2011
  186. Chan E., Leung S. N. , Khan M. O., Naguib H E, Dawson F. , and Adinkrah V., Novel thermoplastics foams for electronic packaging applications, Foams 2011 TopCon, International Conference Proceedings, Iselin NJ, Sept. 2011.
  187. Ghaffari Mosanenzadeh S., Lee W., Naguib H E., Park C B and Atalla N., Effect of water soluble polymer on acoustic performance of environmentally friendly open cell acoustic foams, Foams 2011 TopCon, International Conference Proceedings, Iselin NJ, Sept. 2011.
  188. Wang, J., Naguib, H.E., and Bazylak, A. Morphology Changes of Porous PPy/TFSI Surface during Activation, 219th ECS (Electrochemical Society) Meeting, May 1-6, 2011, Montreal, Canada.
  189. Leung, L. and Naguib, H.E. The processing and characterization of polycaprolactone scaffolds for bone tissue engineering applications, PPS-27, May 10-14, Marrakesh, Morocco, 2011.
  190. (Keynote) Khan, M.O., Leung, S.N., Chan, E., Naguib, H.E., and Dawson, F. Enhanced thermal conductivity of polymer nanocomposites filled with graphene sheets, PPS-27, May 10-14, Marrakesh, Morocco, 2011.
  191. Majithiya, K., Park, C.B., and Naguib, H.E. Acoustic behavior of perforated expanded polypropylene foam, SPE ANTEC Technical Papers, Manuscript ID: PENG-11-2010-0492 Boston, MA, USA, May 1-5, 2011.
  192. Ghaffari Mosanenzadeh, S., Naguib, H.E., and Park, C.B. Development and characterization of environmental friendly open-cell acoustic foams, SPE ANTEC Technical Papers, Manuscript ID: PENG-11-2010-0487 Boston, MA, USA, May 1-5, 2011.
  193. Mohammed Kshad and Haani E. Naguib, Buckling behavior of origami unit cell facets under compressive loads, Paper [10596-19], SPIE. 10596, Behavior and Mechanics of Multifunctional Materials and Composites 2018.
  194. Ali Anwer, Hui (Vina) Ye and Hani E. Naguib, 3D Printing of Custom Fabricated Textured Flexible Fiber Composites, Paper # S19-212, Polymer Processing Society Conference PPS 33, December 10 -14 Cancun, Mexico.
  195. Anwer, Ahmed A.W and Naguib, Hani E, Nature-Inspired Structures for Reduced Impact Load Transfer, Paper # S10-207 Polymer Processing Society Conference PPS 33, December 10 -14 Cancun, Mexico.
  196. Kshad M A, Naguib H E, Additive Manufacturing for Development of Polymeric Ron-Resch-Like Origami Structure for Damping Applications, Paper # S19-208, Polymer Processing Society Conference PPS 33, December 10 -14 Cancun, Mexico.
  197. Shahriar Ghaffari, Kyle Yong Kim, Cynthia Liao, Chul B. Park, Hani E. Naguib, Development and characterization of multifunctional super-insulated organic aerogels nano foams, SPE Foams 2017 Conference 15th International Conference on Advances in Foam Materials & Technology, September 9-12 Bayreuth Germany, 2017.
  198. Anwer A., Rizvi R., Naguib H.E. (2017), Bio-inspired Textured Composite Surfaces with increased Hydrophobicity, Society of Plastics Engineers (SPE) Annual Technical Conference ANTEC, May 8-10, 2017. Anaheim, California, USA
  199. Anwer A.A.W., Naguib H.E. (2017), Macromolecular Structure-Property Relationship For Impact Strength and Hardness Of Polydimethylsiloxane (PDMS) Blends, Society of Plastics Engineers (SPE) Annual Technical Conference ANTEC, May 8-10, 2017. Anaheim, California, USA
  200. Anwer M.A.S., Naguib H.E. (2017), Evaluation of the Mechanical and Morphological Characteristics of PLA-Lignin, PLATannin and PLA-CNF Composites, Society of Plastics Engineers (SPE) Annual Technical Conference ANTEC, May 8-10, 2017. Anaheim, California, USA
  201. Li L., Wang W., Anwer A., Anwer M.A.S., Guo Q., Kenny A., Naguib H.E. (2017), Development of High Density Syntactic TPU Foam by Incorporation of Expancel through Extrusion, Society of Plastics Engineers (SPE) Annual Technical Conference ANTEC, May 8-10, 2017. Anaheim, California, USA
  202. Nazanin Khalili; Xuechen Shen; Hani E. Naguib, On the modeling and characterization of an interlocked flexible electronic skin, Proc. SPIE. 10168, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2017, 101680C. (April 12, 2017) doi: 10.1117/12.2263980

Invited and Scholarly Addresses

  1. (Invited) Naguib H E, Smart Materials with Adaptive Properties for Aerospace Industries, Boeing Aircraft Company, Dec 2017.
  2. (Keynote) Naguib H E, 3D printing of Custom Fabricated Textured Flexible Fiber Composites”  S19-212,  PPS33 Conference of the Polymer Processing Society, Cancún, México December 10-14th, 2017.
  3. Naguib, H E. Foam Tutorial on Bio and Sustainable Foams, SPE Foams Topcon conference Bayreuth Germany October 2017
  4. (Invited) Kshad Mohammed and Naguib H E., Design of 3D printed Ron-Resch-Like Origami structures with tailored geometrical properties, ASME Smart Materials and Adaptive Structures and Intelligent Systems SMASIS 2017, Snowbird Utah, September 17 to 20, 2017
  5. (Keynote) Anwer, Ali, and Naguib H. E, Bio-inspired textured composite surfaces with abrasion resistance and high friction properties, Polymer Processing Society, PPS America and Africa, S10-117, Dresden Germany June 26 to 29, 2017
  6. (Invited) Naguib H E., Shape Memory Origami Inspired Mechanical Metamaterials, SPE ANTEC 2016 Fellows Forum Anaheim, May 2017.
  7. (Invited) Naguib H E., Smart materials in smart textiles and artificial muscles, American University in Cairo, February 23, 2017, Cairo Egypt..
  8. (Invited) Naguib H E., Smart and multifunctional polymers with adaptive properties, MIT, Nov 30, 2016, Boston USA.
  9. Naguib, H E. Foam Tutorial on Bio and Sustainable Foams, SPE Foams Topcon conference Seattle USA 2016
  10. (Invited) Kshad M. A, and Naguib H E, Characterization of Origami Shape Memory Metamaterials (SMMM) Made of Bio Compatible Polymers, Paper S19-587, Polymer Processing Society Meeting PPS 32, Lyon France July 25 to 29, 2016.
  11. (Invited) Naguib H E., Smart Polymers and Composites with Multifunctional and Adaptive Properties, SPE ANTEC 2016 Fellows Forum Indianapolis, May 2016.
  12. Naguib H E., Multifunctional Nanostructured Biopolymers and Composites”, University of Reims, Reims France December 2015
  13. Naguib H E., Smart Polymers for electronic skins and Energy Applications”, University of Wisconsin Madison, November 2015
  14. Naguib H E., Development of nano-structured conductive polymer based hybrid materials for supercapacitor electrode development, SMASIS2015-9152, ASME 2015 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS2015) September 21-23, 2015 Colorado Springs, Colorado, USA.
  15. Naguib, H E. Foam Tutorial on Bio and Sustainable Foams, SPE Foams Topcon conference Kyoto Japan 2015
  16. Naguib H E., Smart Nano-structured Polymers for Electronic Applications”, Xerox Research Centre of Canada, May 2015
  17. Naguib H E., Smart Nano-structured Polymers for Biomedical and Energy Applications”, Ohio State University, March 2015
  18. (Invited) Naguib H E., Development of open cell acoustic foams using rotational molding process, Society of Plastics Engineers (SPE) Annual Technical Conference ANTEC, March 23-25, 2015. Orlando, Florida, USA
  19. Naguib H E., Smart and Active Nanopolymers and Composites, Royal Military College, December 2014
  20. (keynote) Ghaffari S, Naguib H E., Multifunctional PLA Biomaterials for Thermal Management Applications, ISBBB 2014 Guelf Ontario.
  21. (Keynote) Song J J. , Naguib H E, Development of multifunctional shape memory polymer foams, The Polymer Processing Society 30th Annual Meeting June 8-12, 2014, Cleveland, Ohio, USA.
  22. Naguib, H E. Foam Tutorial on Bio and Sustainable Foams, SPE Foams Topcon conference Iselin NJ USA 2014
  23. Naguib, H E. Foam Tutorial on Bio and Sustainable Foams, SPE Foams Topcon conference Seattle USA 2013
  24. Naguib, H E “Modeling the acoustic absorption behaviour of Polylactide open cell foams with bimodal structure for high acoustic absorption”, 21st International Congress on Acoustics, Montreal, Quebec, Canada, June 2-7, 2013.
  25. Naguib, H E., Sustainable Foam Tutorial, Biofoams Conference , Toronto 2013
  26. Naguib, H.E. “Development of Bio-based Foams with Improved Acoustic and Mechanical Performance”, the InterNoise ASME NCAD meeting, New York City, NY, USA, August 19-22, 2012
  27. Naguib H E., Smart and Nanostructured Polymers and composites, University of Nancy France June 2012.
  28. Naguib, H. E., “New materials advances for smart electro-active polymers” 4th International Smart Materials and Structures Systems CIMTEC, Terme, Italy, June 2012
  29. Naguib, H E. Foam Tutorial on Bio and Sustainable Foams, SPE Foams Topcon conference Barcelona Spain 2012
  30. Naguib H. E. Foam Tutorial on Bio and Sustainable Foams, SPE Foams Top con conference New Jersey 2011
  31. Naguib H E., Smart and Nanostructured Polymers, State University of Florida, Tallahassee FL, December 2011.
  32. Ghaffari S and Naguib H E., Smart Foams for Acoustic Damping Properties, Ecole Polytechnique Montreal, November 2011.
  33. Naguib H E, MultiFunctional Composites Materials, University of Kyoto, Japan, October 2011.
  34. Naguib H E, Smart and Nanostructured Materials, University of Naples, Italy, July 2011.
  35. (Keynote) Naguib H E, Development of Adaptive Electroactive Polymers for Actuators Applications, 94th Canadian Chemistry Conference and Exhibition Montreal, June 5-9, 2011
  36. Society of Plastics Engineers International Webinar lecture, “Bio and Sustainable Foams”, SPE 2011.
  37. Naguib H E., Adaptive and Multifunctional Polymers in Biomedical Applications, Ecole Polytechnique of Montreal, May 6, 2011.
  38. (Keynote) Khan, M.O., Leung, S.N., Chan, E., Naguib, H.E., and Dawson, F. Enhanced thermal conductivity of polymer nanocomposites filled with graphene sheets, PPS-27, May 10-14, Marrakesh, Morocco, 2011.
  39. Naguib H E., Foam Seminar, Foam Properties, Foams 2009 TopCon, 8th International Conference, Seattle WA, 2010.
  40. Naguib, H.E. Bio and Sustainable Foams, SPE Webinar Seminar Presentation, 2010.
  41. Naguib H E, Smart and Functional Materials, University of Kyoto, Japan, May 2010.
  42. Rizvi R. and Naguib H E, Polymer Nanocomposites and Nanostructuring, University of Tokyo, Japan May 2010.
  43. Naguib H E., Foam Seminar, Foam Properties, Foams 2009 TopCon, 7th International Conference, Iselin NJ, 2009.
  44. Naguib H E., Foam Seminar, Foam Properties, Foams 2008 TopCon, 6th International Conference, Charlotte NC, 2008.
  45. McRae, J. and Naguib, H.E. Vibroacoustics properties of aluminum foams structures. Cymat, Toronto, April, 2007.
  46. Naguib, H.E. Design and optimization of functional materials. Magna International, Toronto, March, 2007.
  47. Naguib, H.E. Lite Materials”, Bombardier, University of Toronto, Toronto, February, 2007.
  48. Naguib H E., Foam Seminar, Foam Properties, Foams 2008 TopCon, 6th International Conference, Chicago IL, 2006.
  49. Naguib, H.E. Foamability of PMMA Clay Nanocomposites. SPE Online Seminar Presentation, 2005.
  50. Naguib, H.E. Advanced Functional Polymers, University of Toronto, Toronto, 2005.
  51. Price, A., Edgerton, A., Cocaud, C., Jnifene, A., and Naguib, H.E. Smart Materials Based Artificial Muscles. 14th Annual Conference on Intelligent Systems, Ottawa, June, 2004.
  52. Naguib, H.E. Advancements in nanocomposites, biomaterials and smart materials, Canadian Embassy in Paris, France, March, 2004.
  53. Naguib, H.E. Development of a novel extrusion processing technology for manufacture of ultra low-density, fine-cell composite foams, Department de genie chimique / CERSIM University of Laval, Quebec, November, 2003.
  54. Naguib, H.E. CANCOM conference 2003, Ottawa, Ontario, August, 2003.
  55. Naguib, H.E. Development of a Novel Extrusion Processing Technology for Manufacture of Ultra Low-Density, Fine-Cell Polyolefins Foams, The Ottawa Carleton Institute for Mechanical and Aerospace Engineering (OCIMAE), Carleton University, December, 2002.
  56. Naguib, H.E. Development of Novel Active Materials Based Devices, Sponsor Meeting with the Defence and Civil Institute of Environmental Medicine, Department of National Defense, held in Toronto, Canada, December, 2001.
  57. Naguib, H.E. and Park, C.B., Further development of a novel extrusion processing technology for the manufacture of open-celled microcellular foams. Industrial Sponsor Meeting with Eastman Kodak Company, Rochester, U.S.A, March, 2001.
  58. Naguib, H.E. and Park, C.B. Development of a novel extrusion processing technology for the manufacture of open-celled microcellular foams, Industrial Sponsor Meeting with Eastman Kodak Company held in Rochester, U.S.A., March, 2000.
  59. Naguib H. E. and Park, C.B. Development of a novel extrusion processing technology for manufacture of low-density, fine-cell PP foams, Sponsor Meeting with Borealis AG, Toronto, August, 1998.
  60. Naguib, H.E. and Park, C.B. Development of a novel extrusion processing technology for manufacture of low-density, fine-cell PP foams, Sponsor Meeting with PCD Polymer AG, Toronto, May, 1998.

Conference Presentations 

  1. Zia Saadatania, Shahriar Ghaffari, Ebrahim Esmailzadeh, Hani E. Naguib, High performance triboelectric nanogenerator using polyimide aerogel for energy harvesting and active sensing,  Paper [10601-4], SPIE Smart Structures and NDE 2018, Denver Colorado March 4-8 2018.
  2. Mohammed Kshad and Haani E. Naguib, Buckling behavior of origami unit cell facets under compressive loads, Paper [10596-19], SPIE Smart Structures and NDE 2018, Denver Colorado March 4-8 2018.
  3. Yu-Chen Sun, Shenyang Cai, Jie Ren, and Hani E. Naguib, Room Temperature Deformable Shape Memory Composite with Low Activation Temperature, ASME Smart Materials and Adaptive Structures and Intelligent Systems SMASIS 2017, Snowbird Utah, September 17 to 20, 2017
  4. Khalili N. and Naguib H E., Skin-Mountable Large Strain Flexible Sensors for Human Motion Detection, ASME Smart Materials and Adaptive Structures and Intelligent Systems SMASIS 2017, Snowbird Utah, September 17 to 20, 2017
  5. (Invited) Kshad Mohammed and Naguib H E., Ron Resch Origami Structures with tailored geometrical properties, ASME Smart Materials and Adaptive Structures SMASIS 2017, Snowbird Utah, September 17 to 20, 2017
  6. Anwer, A, and Naguib H. E, Shock damping properties of out-of-plane reinforced composites with functionality graded syntactic foams, Polymer Processing Society, PPS America and Africa, S05-118, Dresden Germany June 26 to 29, 2017
  7. Pearson A, and Naguib H. E, Novel polyurethane elastomeric composites reinforced with alumina, aramid, and poly(p-phenylene- 2,6-benzobisoxazole) short fibers, development and characterization of the thermal and dynamic mechanical properties, S07- 121 Polymer Processing Society, PPS America and Africa, Dresden Germany June 26 to 29, 2017
  8. Anwer A., Rizvi R., Naguib H.E. (2017), Bio-inspired Textured Composite Surfaces with increased Hydrophobicity, Society of Plastics Engineers (SPE) Annual Technical Conference ANTEC, May 8-10, 2017. Anaheim, California, USA
  9. Anwer A.A.W., Naguib H.E. (2017), Macromolecular Structure-Property Relationship For Impact Strength and Hardness Of Polydimethylsiloxane (PDMS) Blends, Society of Plastics Engineers (SPE) Annual Technical Conference ANTEC, May 8-10, 2017. Anaheim, California, USA
  10. Anwer M.A.S., Naguib H.E. (2017), Evaluation of the Mechanical and Morphological Characteristics of PLA-Lignin, PLATannin and PLA-CNF Composites, Society of Plastics Engineers (SPE) Annual Technical Conference ANTEC, May 8-10, 2017. Anaheim, California, USA
  11. Li L., Wang W., Anwer A., Anwer M.A.S., Guo Q., Kenny A., Naguib H.E. (2017), Development of High Density Syntactic TPU Foam by Incorporation of Expancel through Extrusion, Society of Plastics Engineers (SPE) Annual Technical Conference ANTEC, May 8-10, 2017. Anaheim, California, USA
  12. Nazanin Khalili; Xuechen Shen; Hani E. Naguib, On the modeling and characterization of an interlocked flexible electronic skin, SPIE. 10168, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2017, 101680C. (April 12, 2017) doi: 10.1117/12.2263980
  13. HaoTian Harvey Shi; Hani E. Naguib, Layered conductive polymer on nylon membrane templates for high performance, thin-film supercapacitor electrodes, SPIE. 9800, Behavior and Mechanics of Multifunctional Materials and Composites 2017, (April 18, 2017) doi: 10.1117/12.2222007
  14. Yu-Chen Sun; Benjamin Leaker; Hani E. Naguib, Development of eletrothermal actuator (ETA) with low activation voltage, SPIE. 10165, Behavior and Mechanics of Multifunctional Materials and Composites 2017, 101650Q. (April 11, 2017) doi: 10.1117/12.2263610
  15. Rizvi; A. Anwer; H. Naguib, Multifunctional surfaces produced using fiber debonding and pullout in composite materials, Proc. SPIE. 10165, Behavior and Mechanics of Multifunctional Materials and Composites 2017, 101650X. (April 11, 2017) doi: 10.1117/12.2264631
  16. Ghaffari Mosanenzadeh, S, Vadhari Ali, , Naguib H E., Park C B, on the structure and properties of flexible open-cell polyurethane foams, SPE Foams Topcon conference 2016, Seattle 2016.
  17. Kshad M. A, and Naguib H E, Development of novel polymeric metamaterials based on origami foamed structures, SPE Foams Topcon conference 2016, Seattle 2016.
  18. Kshad M. A, and Naguib H E, Experimental investigation of shape memory metamaterial (SMMM) made of carbon reinforced polymers, SMASIS2016-9344, ASME 2016 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS) September 28-30, 2016 in Stowe, VT.
  19. Shi, Hao and Naguib H E., Novel fabrication route for a lightweight, low vapour permeable packaging suited for flexible energy storage applications, SMASIS2016-9345, ASME 2016 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS) September 28-30, 2016 in Stowe, VT.
  20. Khalili N, Kwon R.H., Naguib, H.E., Microstructured flexible electronic skin with high pressure sensitivity, SMASIS2016-9346, ASME 2016 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS) September 28-30, 2016 in Stowe, VT.
  21. Sun Y-C, Naguib H E, Fabrication and characterization of polymeric based electrothermal nanocomposites actuator, SMASIS2016-9347, ASME 2016 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS) September 28-30, 2016 in Stowe, VT
  22. Ugalde A, and Naguib H E, Improvement of a metal-air batteries cathode by the use of TPU CNT/graphene foams, SMASIS2016-9348, ASME 2016 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS) September 28-30, 2016 in Stowe, VT.
  23. Khalili N, Kwon R.H., Naguib, H.E. , Conducting polymer hydrogels (CPHs) for electronic skin applications S19-585, Polymer Processing Society Meeting PPS 32, Lyon France July 25 to 29, 2016.
  24. Sun Y. C., Shi H. T., and Naguib, H. E., Fabrication and characterization of β-poly(vinylidene fluoride)/silanetreated titanium dioxide dielectric nano-composites. SPIE Smart Structures NDE Conference. [9800-23] March 20-24 2016, Las Vegas, NV, USA
  25. Khalili, H.E. Naguib, R.H. Kwon, “Development, fabrication, and multiobjective optimization of highly sensitive conjugated polymer based piezoresistive sensors in electronic skin applications,” Proceedings of SPIE, Behavior and Mechanics of Multifunctional Materials and Composites, 9800-50, Las Vegas, 2016.
  26. Shi H T, Naguib H  E, Fabrication and characterization of layered conductive polymer on nylon membrane templates for high performance, thin-film supercapacitor electrodes, manuscript 9800-19, SPIE Smart Structures/NDE, 20 – 24 March 2016, Las Vegas, Nevada, United States
  27. Kshad M. A. and Naguib H E., Characterization of origami shape memory metamaterials (SMMM) made of bio-polymer blends, SPIE 9800, Behavior and Mechanics of Multifunctional Materials and Composites 2016, 98000H; doi:10.1117/12.2222093, SPIE Smart Structures/NDE, 20 – 24 March 2016, Las Vegas, Nevada, United States
  28. Wang, S., Kazemi, Y, Kong T., Ameli, A, Park CB, and Naguib H E, Decoupling The Effects Of Cell Size And Relative Density On Electrical Conductivity In Polystyrene/MWCNT Nanocomposite Foams, SPE Foams Topcon conference 2015, Kyoto 2015.
  29. Sun, Y. C, Terakita D., and Naguib H E., Fabrication Of Pvdf Based Thermoelectric Foam Via Temperature Elevated Super Critical Carbon Dioxide Batch Foaming Method, SPE Foams Topcon conference 2015, Kyoto 2015.
  30. Sun, Y C, Wang Y K., and Naguib H E, Sun, Y. C., Wang, Y., and Naguib, H. E. (2015) Study of the thermoelectric performance of GNP/PVDF and MWCNT/PVDF composites fabricated via melt blending method, Society of Plastics Engineers (SPE) Annual Technical Conference ANTEC, March 23-25, 2015. Orlando, Florida, USA
  31. Wang S, Ameli A, Kazemi Y, Yu K J, Park C B, Naguib H E, Controlled Foaming of Polystyrene MWCNT by Carbon Dioxide, Society of Plastics Engineers (SPE) Annual Technical Conference ANTEC, March 23-25, 2015. Orlando, Florida, USA
  32. Rizvi R., Dutta T, Fernie G, Song H, and Naguib H E, Compliant High Friction Surfaces for Ice Made Using Polymer Fiber Composites, Society of Plastics Engineers (SPE) Annual Technical Conference ANTEC, March 23-25, 2015. Orlando, Florida, USA
  33. Ghaffari, S. Liu M. W., Palhares H. G., Naguib H E, Study the Effect of hBN Fibre Content and Aspect Ratio on PLA Based Composite Thermal Conductivity, paper no. 2097423, Society of Plastics Engineers (SPE) Annual Technical Conference ANTEC, March 23-25, 2015. Orlando, Florida, USA
  34. Shi H. T., Dumas J., Bonnevide M., Naguib H. E., A Study on the Effect of Twin-Screw Melt Blended Nano-Fillers on Polypropylene Nanocomposite Hybrid Electrical and Morphological Properties for Supercapacitor Applications, Paper No. 2097479, Society of Plastics Engineers (SPE) Annual Technical Conference ANTEC, March 23-25, 2015. Orlando, Florida, USA
  35. Ghaffari Mosanenzadeh, S., Naguib H E., Park C B, and Atalla N., Microstructural Design Of Porous Membrane For Effective Sound Absorption Performance” paper No. 2098142, Society of Plastics Engineers (SPE) Annual Technical Conference ANTEC, March 23-25, 2015. Orlando, Florida, USA
  36. Khalili N, Naguib H. E., and Kwon R, Transmission Line Circuit model for  Polypyrrol -based Mechanical Sensors, paper No. 9430-86, SPIE Smart Structures/NDE, March 8-12, 2015, San Diego, California, USA
  37. Shi H. T., Naguib H. E., Fabrication and Characterization of Polyaniline-based Nanocomposite Electrodes for Lightweight, Flexible, High Performance Hybrid Supercapacitor Applications, paper No. 9432-36, SPIE Smart Structures/NDE, March 8-12, 2015, San Diego, California, USA
  38. Sun, Y. C., Terakita, D., Tseng, A.C., and Naguib, H. E. (2015) Study of the thermoelectric performance of GNP/PVDF and MWCNT/PVDF composite fabricated through melt blending method. SPIE Smart Structures NDE Conference. [9432-8] San Diego, CA, USA
  39. Al Jahwari F and Naguib H E. , Viscoelastic Modeling and Validation of Functionally Graded Heterogeneous Porous PLA Structures with a C1-Continuous Plate Theory and Novel Homogenization, SPE Foams Topcon conference 2014, Iselin NJ.
  40. Lee Ka yeung Terence , Naguib Hani E, Lian Keryn, Multiwall Carbon nano-tubes/conductive polymer composite for supercapacitor applications, ASME SMASIS 2014 Newport September 2014.
  41. Anwer M. and Naguib H E., Development and Characterization of Polylactide Based Bio-Composites submitted to the ASME IMECE2014-39261 Montreal 2014
  42. Al Jahwari F and Naguib H E. , Experimental and Numerical Analysis on the Buckling Behavior of Functionally Graded Porous Media with Extension-Capable C1 Higher Order Plate Theory, IMECE2014-39090, Montreal 2014
  43. Ghaffari Mosanenzadeh, H.E. Naguib, C.B. Park, and N. Atalla, Biobased Graded Foams For Acoustic Applications, Proceedings of The Canadian Society for Mechanical Engineering International Congress 2014, June 1-4, 2014, Toronto, Ontario, Canada
  44. Eastwood, T. Looi, H. E. Naguib and J. M. Drake, “Fluidic Actuators for Minimally Invasive Neurosurgical Instruments” in Hamlyn Symposium on Medical Robotics, vol. 9, 2014, p. 75.
  45. Ghaffari Mosanenzadeh S., Naguib H E., Highly Thermal Conductive Bio-based Polymers, proceedings of The Canadian Society for Mechanical Engineering International Congress 2014, June 1-4, 2014, Toronto, Ontario, Canada
  46. Ghaffari Mosanenzadeh S., Naguib H E., Effect of matrix on thermal conductivity of high thermally conductive polymeric composites for electronic packaging applications, The Polymer Processing Society 30th Annual Meeting June 8-12, 2014, Cleveland, Ohio, USA.
  47. Al Jahwari F, Naguib H E, An Accurate Hierarchical Higher Order Plate Theory for Tailoring the Properties of Functionally Graded Porous Media, The Polymer Processing Society 30th Annual Meeting June 8-12, 2014, Cleveland, Ohio, USA.
  48. Song J J. , Naguib H E, Development of multifunctional shape memory polymer foams, The Polymer Processing Society 30th Annual Meeting June 8-12, 2014, Cleveland, Ohio, USA.
  49. In, E, and Naguib H E., Fabrication and Characterization of Silica Aerogel as synthetic tissues for medical imaging phantom, Paper S12-152, PPS-30, The Polymer Processing Society 30th Annual Meeting June 8-12, 2014, Cleveland, Ohio, USA.
  50. Guan Q., Naguib H E, “Development and characterization of bio-based PA composites for electronic packaging applications using micro fillers, Society of Plastics Engineers, SPE Annual Technical Conference ANTEC 2014, Technical Papers, Paper # 1871469, April 28–30, 2014. Las Vegas, Nevada, USA
  51. Ghaffari Mosanenzadeh, S., Zhou, Y, Gengyu Xu, G., Leung, S. N.,  Naguib H E, “Development and characterization of bio-based PA composites for electronic packaging applications using micro fillers, Society of Plastics Engineers, SPE Annual Technical Conference ANTEC 2014, Technical Papers, Paper # 1871534, April 28–30, 2014. Las Vegas, Nevada, USA
  52. Khalili N., Naguib H. E., Kwon R. H., On the geometrical and mechanical multi-aspect optimization of PPy/MWCNT actuators, paper No. 9056-65, SPIE Smart Structures/NDE 2014, San Diego CA USA, 2014.
  53. Song J. J., Naguib H. E., Fabrication and characterization of a foamed polylactic acid (PLA)/ thermoplastic polyurethane (TPU) shape memory polymer (SMP) blend for biomedical and clinical applications, Paper No.9058-11, SPIE Smart Structures/NDE 2014, San Diego CA USA, 2014.
  54. Keryn Lian, Han Gao, Kayeung Lee, Haoran Wu, Matthew Genovese, Hani Naguib, paper# 632: A Comparative Study of Solid Pseudocapacitive Electrochemical Capacitors by 224th ECS Meeting in San Francisco, California October 27-November 1, 2013.
  55. Guan Q., Naguib H E, Development of Biobased PLA, PHBV and Chitin Nanowhiskers Composites Foam, Top Con Foams 2013 conferences September 11, 12, Seattle, USA 2013.
  56. Kayeung Lee, K., Naguib H E. and Lian, K., Flexible Multiwalled Carbon nanotube/Polyaniline composite electrode for supercapacitor application, ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2013, Snowbird, Utah, USA, September 16-18, 2013.
  57. Rizvi, R., Naguib, H E., Correlation of Rheological and Electrical Filler-Network Evolution in PVDF-MWNT Piezoresistive Nanocomposites, SMASIS2013-3241, ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2013, Snowbird, Utah, USA, September 16-18, 2013.
  58. Khalili, N, Sun, Y. C, Naguib, H. E., Kwon, R. H. “Towards the Optimization of Conducting Polymer Actuators”, ASME conference on Smart Material, Adaptive Structures, and Intelligent Systems SMASIS 2013, Snowbird, Utah, USA, September 16-18, 2013.
  59. Ghaffari Mosanenzadeh, H.E. Naguib, C.B. Park, and N. Atalla, “Modeling the acoustic absorption behaviour of functionally graded open cell foams”, Biofoams Conference 2013, Toronto, 2013.
  60. In E. and Naguib H E. , Development of Aerogels Foams For Medical Imaging, Biofoams Conference 2013, Toronto, 2013.
  61. Leung, S.N., and Naguib, H.E., “Modeling of Thermally Conductive Polymer Matrix Composite Foam,” 19th International Conference on Composite Materials, Montreal, QC, Canada, July 28-August 2, 2013.
  62. In E. and Naguib H E. , Polymers Gels For Medical Imaging, 7th World Congress on Biomimetics, Artificial Muscles and Nano-Bio (BAMN2013) will be held on August 26-30, 2013 at Jeju Island, South Korea.
  63. Leung, S.N., Khan, O.M., and Naguib, H.E., “Multifunctional Polymer Matrix Composites Based on Nanocarbons – Carbon Nanotubes and Graphene Nanoplatelets,” PPS-29, Nuremberg, Germany, July 15-19, 2013.
  64. Rizvi, R. Naguib, H.E. and Biddiss E., Piezoresistance Characterization of Porous TPU-MWNT Nanocomposites, PPS-29, Nuremberg, Germany, July 15-19, 2013.
  65. Leung S.N., Chan, E., Naguib H.E., and Dawson F., Thermally Conductive and Electrically Insulating hexagonal Boron Nitride-Filled Polyphenylene Sulfide Composites, SPE ANTEC Technical Papers, Manuscript ID: 1590923 Cincinnati, OH, USA, April 22-24, 2013.
  66. Ghaffari Mosanenzadeh S., Naguib H.E., Park C.B., and Atalla N., Study on the Effect of Materials Elasticity on Acoustic Performance of Bio-based PLA and PHA Blend Foams, SPE ANTEC Technical Papers, Manuscript Cincinnati, OH, USA, April 22-24, 2013.
  67. Jahani D., Jung, P.U., Ameli A., Saniei M., Park C.B. and Naguib H., “Cavity-Integrated Injection Molded Acoustic Foams”, Society of Plastics Engineers, Annual Technical Conference, Technical Papers, Paper # 1591565, Cincinnati, Ohio, April 21-24, 2013
  68. Jahani D., Ameli A., Cofreros A., Park C.B. and Naguib H., “Injection Foam Molding Of Highly Expanded Polycarbonate with Open-Cell Structure using Mold Opening”, Society of Plastics Engineers, Annual Technical Conference, Technical Papers, Paper # 1591517, Cincinnati, Ohio, April 21-24, 2013
  69. Rizvi, R. Naguib, H.E. and Biddiss E., Development of piezoresistive PVDF-nanocomposites for strain sensing, SPIE Smart Structures/NDE 2013, San Diego CA USA, 2013.
  70. Leung S. N., H. E., ,Development of novel multifunctional biobased polymer composites with tailored conductive network of micro-and-nano fillers, Paper No. SSN04-32, SPIE Smart Structures/NDE 2013, San Diego CA USA, 2013.
  71. Lee Ka Yeung, Naguib H. E., Biddiss E., and Lian K., “The Application of Multiwall Carbon Nano-tubes/Polypyrrole Composite Electrode in Flexible Energy Storage System for Electronic Textile and Wearable Electronics, SMASIS2012-7986, ASME Smart Materials, Adaptive Structures and Intelligent Systems 2012, Stone Mountain GA, Sept. 2012
  72. Rizvi R., Naguib H. E., Biddiss E., “Characterization of a Porous Multifunctional TPU-MWNT Nano-composite for Pressure Sensing, SMASIS2012-8178, ASME Smart Materials, Adaptive Structures and Intelligent Systems 2012, Stone Moutain GA, Sept. 2012
  73. Rizvi, R. Naguib, H.E. and Biddiss E., Piezoresistivity of TPU MWCNT-nanocomposites foams, SPE TopCon FOAMS 2012 Barcelona Spain, 2012.
  74. Ghaffari Mosanenzadeh, H.E. Naguib, C.B. Park, and N. Atalla, “Development of Bio-based Foams with Improved Acoustic and Mechanical Performance”, Proceedings of the InterNoise ASME NCAD meeting, New York City, NY, USA, August 19-22, 2012.
  75. Leung S., Khan M.O and Naguib H E, “Development of Novel Graphene and Carbon Nanotubes Based Multifunctional Polymer Matrix Composites”, the International Conference on Nanoscience + Technology (ICN+T2012) – July 23-27, 2012, Paris, France.
  76. Leung S. N., Khan, M. O., Naguib, H. E., Dawson F., and Adinkrah, V., Fabricatoin of Thermoplastic Polymer-Matrix Composites for Thermally Conductive Heat Sink Insulating Pad, PPS Americas Conference 2012, Niagara Falls, Ontario, Canada, May 21-24, 2012.
  77. Mosanenzadeh S. G., Leung S. N., Naguib, H. E., Park C.B., and Atalla N., Fabrication and Characterization of Bio-based Composite Foams of PLA and PHA for Acoustic Applications, PPS Americas Conference 2012, Niagara Falls, Ontario, Canada, May 21-24, 2012.
  78. Khan, M. O., Leung S. N., Naguib, H. E., Dawson F., and Adinkrah, V., Tailored Electrical Conductivity of Thermally Conductive Polymer Composites Embedded with hBN-GNP Fillers for ULSI, Capacitors, and Electronic Packaging Materials, PPS Americas Conference 2012, Niagara Falls, Ontario, Canada, May 21-24, 2012.
  79. Rizvi, R. and Naguib, H.E., A Study on the Electrical Conduction and Piezoresistance of Polyethylene-Carbon nanotube and –Graphene Nanoplatelet Composites, PPS Americas Conference 2012, Niagara Falls, Ontario, Canada, May 21-24, 2012.
  80. Guan, Q., Rizvi, R., and Naguib, H.E., The effect of Polyhydroxybutyrate-co-valerate (PHBV) Content on Physical and Morphological Properties of Polylactic Acid (PLA) Foams, PPS Americas Conference 2012, Niagara Falls, Ontario, Canada, May 21-24, 2012.
  81. Khan M. O., Leung S. N., Naguib H E, Dawson F., and Adinkrah V., One- and three-dimensional alignment of graphene using new fabrication strategies for thermally conductive LLDPE-graphene composite, SPE-ANTEC Tech. Papers (2012), Orlando, USA April 2-4, 2012.
  82. Guan Q., Rizvi R., Naguib H.E., The effect of Polyhydroxybutyrate-co-valerate (PHBV) content on thermal, rheological, mechanical properties and foaming behavior of Polylactic Acid (PLA), SPE-ANTEC Tech. Papers (2012), Orlando, USA April 2-4, 2012.
  83. Ghaffari Mosanenzadeh S., Naguib H.E., Park C.B., and Atalla N., Development and Characterization of Environmentally Friendly Open-Cell Acoustic Foams, SPE-ANTEC Tech. Papers (2012) , Orlando, USA April 2-4, 2012.
  84. Jahani D., Ameli A., Park C. B., Naguib H., The Influence of Processing Temperatures and Nucleating Agent in Foaming of A Thin Walled Injection Molded Part, SPE-ANTEC Tech. Papers (2012), Orlando, USA April 2-4, 2012.
  85. In, E., Naguib, H E., Haider M., Development of Polymer Gel for MRI liver Phantom with lesion particles, ID: 1151723, SPIE Smart Structures/NDE 2012, San Diego CA USA Mar. 11-15, 2012
  86. Leung, S.N., Khan, M.O, Naguib, H.E., Dawson, F., and Adinkrah, V., Applications of multifunctional polymer-matrix composites in hybrid heat sinks, SPIE Smart Structures/NDE 2012, San Diego CA USA, Mar. 11-15, 2012
  87. Wang, J. Naguib H E and Bazylack A., Development of conductive fibrous polymer membrane, SPIE Smart Structures/NDE 2012, San Diego CA USA, Mar. 11-15, 2012
  88. Khan M.O., Chan E., Leung S.N. , Naguib H.E., Dawson F., and Adinkrah V., Multifunctional liquid crystal polymeric composites embedded with grapheme nano platelets, SMASIS 2011, Scottsdale AZ, USA, Sept 8-21, 2011.
  89. Rizvi R., Cochrane B.,, Naguib H. E, and Bidiss E., Effect of nanoparticle filler type on the piezoresistance of polyethylene composites, SMASIS2011-5136, ASME Smart Materials, Adaptive Structures and Intelligent Systems 2011, Scottsdale AZ, Sept. 2011
  90. Chan E., Leung S. N. , Khan M. O., Naguib H E, Dawson F. , and Adinkrah V., Novel thermoplastics foams for electronic packaging applications, Foams 2011 TopCon, International Conference Proceedings, Iselin NJ, Sept. 2011.
  91. Ghaffari Mosanenzadeh S., Lee W., Naguib H E., Park C B and Atalla N., Effect of water soluble polymer on acoustic performance of environmentally friendly open cell acoustic foams, Foams 2011 TopCon, International Conference Proceedings, Iselin NJ, Sept. 2011.
  92. Wang, J., Naguib, H.E., and Bazylak, A. Morphology Changes of Porous PPy/TFSI Surface during Activation, 219th ECS (Electrochemical Society) Meeting, May 1-6, 2011, Montreal, Canada.
  93. Leung, L. and Naguib, H.E. The processing and characterization of polycaprolactone scaffolds for bone tissue engineering applications, PPS-27, May 10-14, Marrakesh, Morocco, 2011.
  94. Majithiya, K., Park, C.B., and Naguib, H.E. Acoustic behavior of perforated expanded polypropylene foam, SPE ANTEC Technical Papers, Manuscript ID: PENG-11-2010-0492 Boston, MA, USA, May 1-5, 2011.
  95. Ghaffari Mosanenzadeh, S., Naguib, H.E., and Park, C.B. Development and characterization of environmental friendly open-cell acoustic foams, SPE ANTEC Technical Papers, Manuscript ID: PENG-11-2010-0487 Boston, MA, USA, May 1-5, 2011.
  96. Khan, M.O., Leung, S.N., Chan, E., Naguib, H.E., Dawson, F., Adinkrah, V., and Lakatos-Hayward, L. The multifunctional characteristics of carbonaceous filler-reinforced poly (phenylene sulfide) composites, SPE ANTEC Technical Papers, Manuscript ID: PENG-11-2010-0446 Boston, MA, USA, May 1-5, 2011.
  97. Chan, E., Leung, S.N., Khan, M.O., Naguib, H.E., Dawson, F., Adinkrah, V., and Lakatos-Hayward, L. Low-density polyethylene composites filled with ceramic fillers for electronic packaging applications, SPE ANTEC Technical Papers, Manuscript ID: PENG-11-2010-0444 Boston, MA, USA, May 1-5, 2011.
  98. Leung, S.N., Khan, M.O., Chan, E., Naguib, H.E., Dawson, F., Adinkrah, V., and Lakatos-Hayward, L. Development of thermally conductive and electrically insulating polymer composites for electronic packaging applications, SPE ANTEC Technical Papers, Manuscript ID: PENG-11-2010-0389 Boston, MA, USA, May 1-5, 2011.
  99. Leung, S.N., Khan, M.O, Chan, E., Naguib, H.E., Dawson, F., Adinkrah, V., and Lakatos-Hayward, L., Enhanced Thermally Conductivity of Novel Multifunctional Polyphenylene Sulfide Composites Embedded with Heat Transfer Networks of Hybrid Fillers, SPIE Smart Structures/NDE 2011, San Diego CA USA, Mar. 6-10, 2011.
  100. Rizvi R., Cochrane B.,, Naguib H., and Lee P., Novel Biodegradable Composites and Foams of Polylactide and Chitin, SPIE Smart Structures/NDE 2011, San Diego CA USA, Mar. 6-10, 2011.
  101. Maher, A., Chan, E., Leung, S.N. Naguib, H., Dawson, F., Adinkrah, V., and Lakatos-Hayward, L., Three-Dimensional Multiphysics Analyses of a CPU Integrated Thermal heat Sink, ASME IMECE 2010. Vancouver, BC Canada, Nov. 12-18, 2010.
  102. Leung L., Khatounabad E., and Naguib H.E. Fabrication and characterization of electrospun poly(DL-lactide-co-glycolide) acid – hydroxyapatite composite scaffolds, ASME IMECE 2010, Vancouver, BC Canada, Nov. 12-18, 2010.
  103. Leung L., Mortazavi S., Dick S.M. and Naguib H.E., Comparative study on the effect of filler size on the mechanical properties of poly(DL-lactide-co-glycolide) acid – hydroxyapatite composite scaffolds, ASME IMECE 2010. Vancouver, BC Canada, Nov. 12-18, 2010.
  104. Badawy, D.A., Zhao, Y., Lidan, Y., Naguib, H.E., Bio-Composite Microfluidic Platforms for Bone Cell Mechanobiology Study, 2010 ASBMR, Toronto ON, Oct. 15-19, 2010.
  105. Rizvi R., and Naguib H.E., Porous Polylactide Nanocomposites Reinforced with Multiwall Carbon Nanotubes and with Chitin, 18th Annual Bio-Environmental Polymer Society Meeting, Toronto, ON, Oct. 13-15, 2010
  106. Tong, L., Rizvi, R., and Naguib H.E., Effect of Processing Parameters on the Morphology of Melt Drawn Polylactide-Multiwall Carbon Nanotubes, ASME Smart Materials, Adaptive Structures and Intelligent Systems 2010, Philadelphia, Sept. 2010.
  107. Rizvi, R., Makaremi, S., and Naguib, H.E., Characterization of the Piezoresistive Behavior of Polydimethylsiloxane-Multiwall Carbon Nanotube Composites, ASME Smart Materials, Adaptive Structures and Intelligent Systems 2010, Philadelphia, Sept. 2010.
  108. Chan, C., Chang, S., and Naguib, H.E. A Parametric Study and Characterization of Porous, Non-Permeable, and Conductive PEGDA-HEMA Hydrogels, ASME 2010 Conference on Smart Materials, Adaptive Structure and Intelligent Systems, Philadelphia PA, Sept 28, 2010.
  109. Wang, J., Naguib, H.E., and Bazylak, A. Investigation of Electroactive Polymers for the PEMFC GDL, Proceedings of the ASME 2010 Eighth International Fuel Cell Science, Engineering and Technology Conference Fuel Cell2010, Brooklyn NY, June 14-16, 2010.
  110. Jung, D.W., Lee, E.K., Park, C.B., and Naguib, H.E. Study on Steam Chest Molding Process for EPP bead foam, SPE ANTEC Technical Papers, Orlando Fl, May 16-20, 2010.
  111. In, E. and Naguib H E., Fabrication And Characterization Of Polymer-based Silica Aerogel, SPE ANTEC Technical Papers, Orlando Fl, May 16-20, 2010.
  112. Rizvi, R. and Naguib, H.E. Fabrication of Solid and Porous Melt Blended Polylactide-Chitin Composites, SPE ANTEC Technical Papers, Orlando Fl, May 16-20, 2010.
  113. Jo, C., In, E., and Naguib, H.E. Fabrication and characterization of ionic polymer gel actuators. SPIE Smart Structures/NDE 2010, San Diego CA USA, Mar. 7-11, 2010.
  114. Price, A D, Naguib, H E., and Ben Amara, F. Development of a deformable mirror based on conductive polymer actuator arrays for use in adaptive optics, SPIE Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring: Electroactive Polymer Actuators and Devices San Diego, March 7 – 11, 2010.
  115. Leung, L., DiRosa, A., and Naguib, H.E. Physical and mechanical properties of poly(?-caprolactone) – hydroxyapatite composites for bone tissue engineering applications, ASME IMECE 2009. Lake Buena Vista FL USA, Nov. 13-19, 2009.
  116. Chan, C., Zhang, W., Naguib, H.E. Development and characterization of novel conductive polypyrrole-polylactic acid open-porous composites. ASME IMECE 2009 Lake Buena Vista, Florida November 13-19, 2009.
  117. Rizvi, R., Czekanski, A., and Naguib, H.E. Characterization and FEA based optimization of elastomeric components for automotive applications. ASME Congress IMECE 2009 Lake Buena Vista, Florida November 13-19, 2009.
  118. Leung, L., Hariri, S., Ma, W., and Naguib, H.E. Fabrication and characterization of electrospun poly(D,L-lactide-co-glycolide) acid bioscaffolds for bone repair applications. Biofoams 2009. Niagara Falls ON Canada, Oct. 27-28, 2009.
  119. Rizvi, R., Cochrane, B., and Naguib, H.E. Fabrication of solid and porous melt blended polylactide-chitin composites. Biofoams 2009. Niagara Falls ON Canada, Oct. 27-28, 2009.
  120. Chan, C., Chan, E., Zhang, W., Naguib, H.E. Comparison Of Novel Conductive Open- And Closed-Porous PPy-PLA Blends. ASME – SMASIS2009 Oxnard, California September 20-24, 2009.
  121. Rizvi, R., Kim, J.-K., and Naguib, H.E. Processing and MWNT composition effects on the thermal, electrical and mechanical properties of PLA-MWNT composites. ASME-SMASIS2009 Oxnard, California September 20-24, 2009.
  122. Rizvi, R. and Naguib, H.E. Novel polyethylene carbon nanotube porous composites. Foams 2009 TopCon, 7th International Conference, Iselin, Sept. 14-17, 2009.
  123. Leung, E. Turner, and H.E. Naguib, Viscoelastic and mechanical properties of gas-foamed poly(-caprolactone) bioscaffolds, Society for Biomaterials 2009 Annual Meeting, 2009.
  124. Price, A. and Naguib, H.E. Optimization of porous membrane core morphology for polypyrrole trilayer actuators, SPIE Smart Structures/NDE 2009, San Diego CA USA, Mar. 8-12, 2009.
  125. Chan, C., Chan, E., and Naguib, H.E. Development and characterization of porous polypyrrole-polylactic acid electroactive blends, SPIE Smart Structures/NDE 2009, San Diego CA USA, Mar. 8-12, 2009.
  126. Jo, C., Naguib, H.E., and Kwon, R.H. Modeling and optimization of ionic polymer gel actuators, SPIE Smart Structures/NDE 2009, San Diego CA USA, Mar. 8-12, 2009.
  127. Rizvi, R., Cochrane, B., and Naguib, H.E. Foaming behavior of melt blended polylactide-chitin composites. SPE ANTEC Technical Papers, Chicago IL, Jun. 22-24, 2009.
  128. Lee, E.K., Lee, K.M., Jung, P.U., Naguib, H.E., and Park, C.B. Comparison of random and block polypropylene copolymers in extrusion foaming. SPE ANTEC Technical Papers, Chicago IL, Jun. 22-24, 2009.
  129. Zhai, W.T., Leung, S.N., Naguib, H.E., and Park, C.B. Preparation of microcellular poly(ethylene-co-octene) rubber foam using supercritical CO2 technology. SPE ANTEC Technical Papers, Chicago IL, Jun. 22-24, 2009.
  130. Rizvi, R., and Naguib, H.E. Synthesis and characterization of LDPE-carbon nanotube composite foams. Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS2008), SMASIS2008-444 (5pp). Ellicott City MD, Oct. 28-30, 2008.
  131. Campbell, J.E., Hibbard G.D., and Naguib, H.E. Design, fabrication and mechanical characterization of pyramidal periodic cellular metal/polyurethane foam hybrid materials. Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS2008), SMASIS2008-318 (9pp). Ellicott City MD, Oct. 28-30, 2008.
  132. Chan, C., Wu, A., and Naguib, H.E. Synthesis and electromechanical characterization of polypyrrole bi-layer thin porous films. Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS2008), SMASIS2008-459, Ellicott City MD, Oct. 28-30, 2008.
  133. McRae, J., Naguib, H.E., and Attala, N. Mechanical and acoustic performance of compression molded open cell polypropylene foams. Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS2008), Ellicott City MD, Oct. 28-30, 2008.
  134. Simkevitz, S.L., and Naguib, H.E. Development of two part porous shape memory polymer nanocomposites. Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS2008), Ellicott City MD, Oct. 28-30, 2008.
  135. Rizvi, R., Khan, M.O., and Naguib, H.E. Synthesis and characterization of PLA-multiwall carbon nanotube composite foams. Foams 2008 TopCon, 6th International Conference on Foam Processing and Technology, Charlotte NC, Sept. 10-11, 2008.
  136. Price, A., Liu, C.C., O’Shaughnessy, C., and Naguib, H.E. Characterization, modeling, and application of conductive polymer trilayer actuators for biomimetic robotics. CANSMART 2008 International Workshop Smart Materials and Structures. Montreal QC, Oct. 23-24, 2008.
  137. (Invited) Leung, L., and Naguib, H.E. Modelling on the mechanical properties of PLGA bioscaffolds under compression. Blowing Agents and Foaming Processes 2008. Berlin, May 20-21, 2008.
  138. (Invited) In, E., Leung, L., and Naguib, H.E. In vitro biodegradation behaviour of poly(D,L-lactide-co-glycolide) 75/25 bioscaffolds with different pore morphology. CSME Symposium. Ottawa ON, Jun. 5-8, 2008.
  139. (Invited) Wu, A., Chan, C., and Naguib, H.E. Electrochemical synthesis and characterization of polypyrrole films doped with lithium perchlorate. CSME Symposium. Ottawa ON, Jun. 5-8, 2008.
  140. Azdast, T., Lee, E.K. Lee, K-M., Park, C.B., Naguib, H.E., Behravesh, A.H., Pachner, E., and Praller, A. Extrusion foaming of high-melt-strength PP with supercritical carbon dioxide I: cell nucleation behaviors. SPE ANTEC. Milwaukee WI, May 4-8, 2008.
  141. Lee, K.M. Lee, E.K., Kim, S.G., Park, C.B., and Naguib, H.E. Bi-cellular polystyrene foam using water and n-butane. SPE ANTEC, Milwaukee WI, May 4-8, 2008.
  142. Zhu, W.L., Lee, E.K., Wan, E., Wong, A., Wu, Q.F., Park, C.B., Naguib, H.E., and Zhou, N.Q. Analysis of cell nucleation and morphology of batch-foamed polypropylene copolymer/poly(dimethylsiloxane) with CO2. SPE ANTEC, Milwaukee, WI, May 4-8, 2008.
  143. Leung, L., Baek, S., and Naguib, H.E. The effects of PLGA composition on morphology and mechanical properties of bioscaffolds. SPE ANTEC Technical Papers. 553-557. Milwaukee WI, May 4-8, 2008.
  144. Wong, S., Lee, J., Naguib, H.E., and Park, C.B. Mechanical properties of injection molded thermoplastic polyolefin (TPO) cellular foams. SPE ANTEC, Milwaukee WI, May 4-8, 2008.
  145. Richards, E., Rizvi, R., Chow, A., and Naguib, H.E. Synthesis and physical characterization of biodegradable PLA/PHBV foams. SPE ANTEC. Milwaukee MI, May 4-8, 2008.
  146. Chu, R.K.M., Naguib, H.E., and Attala, N. Synthesis and characterization of open-cell foams for sound absorption using rotational molding method. SPE ANTEC. Milwaukee WI, May 4-8, 2008.
  147. Jo, C. and Naguib, H.E. Effect of crystallinity on the cell morphology and mechanical properties of HDPE/clay nanocomposite foams, SPE ANTEC. Milwaukee WI, May 4-8, 2008.
  148. Simkevitz, S.L. and Naguib, H.E. Manufacturing and characterization of novel porous two-part shape memory polymer. SPE ANTEC. Milwaukee, WI, May 4-8, 2008.
  149. McRae, J., Naguib, H.E., and Attala, N. Acoustic performance and compression behaviour of perforated aluminium foam. SPIE Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring. San Diego CA, Mar. 9-13, 2008.
  150. Price, A. and Naguib, H.E. Porous conductive polyblends of polyaniline in poly(methyl methacrylate). SPIE Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring. San Diego CA, Mar. 9-13, 2008.
  151. (Invited) Price, A., Berndt, C.S., Deluca, J.M., Farra, N., Gillies, A.G., Kopec, M.O., and Naguib, H.E. Synthesis and evaluation of ionic electroactive polymer actuators. CANSMART conference. Montreal QC, Oct. 10-11, 2007.
  152. (Invited) Leung, L., Chan, C., Song, J., Tam, B., and Naguib, H.E. Effects of cell morphology on in-vitro degradation of PLGA 50/50 scaffolds. BioFoams 2007. Capri Italy, Sept. 26-28, 2007.
  153. (Invited) Perron, J., Naguib, H.E., Daka, J., and Chawla A., Development and characterization of porous PLGA 85/15 scaffold for tissue engineering applications. Blowing Agents 2007. Frankfurt Germany, May 22-23, 2007.
  154. Leung, L., Chan, C., Song, J., Tam, B., and Naguib, H.E. A parametric study on the processing and characterization of PLGA 50/50 bioscaffolds. SPE ANTEC Cincinnati OH, May 6-10, 2007.
  155. Zhen, X., Lee, R., Park, C.B., Pop Illiev, R. and Naguib, H.E. A study on the sorption and desorption of pentane in PP and PET. SPE ANTEC Cincinnati OH, May 6-10, 2007.
  156. Wong, S., Naguib, H.E., and Park, C.B. Effects of processing parameters on the cellular morphology and mechanical properties of mineral-filled thermoplastic polyolefin microcellular foams. SPE ANTEC, Cincinnati OH, May 6-10, 2007.
  157. Zhang, X., Zhu, Z., Park, C.B., Lee, E.K., Chen, N., and Naguib, H.E. Study on the sorption and desorption of N-pentane in polystyrene and polypropylene. SPE ANTEC, Cincinnati OH, May 6-10, 2007.
  158. Price, A., Chen, W., and Naguib, H.E. Synthesis and characterization of porous polyaniline conductive polymers. SPIE Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring. San Diego CA, March 18-22, 2007.
  159. Simkevitz, S.L. and Naguib, H.E. Effects of density and cell morphologies on the shape memory effect of a porous shape memory polymer. SPIE Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, Proceedings of SPIE. San Diego CA, March 18-22, 2007.
  160. (Invited) Leung, L., Perron, J., and Naguib, H.E. Constitutive modeling for porous PLGA 85/15 scaffold in compression. 2006 ASME International Mechanical Engineering Congress and Exposition (IMECE2006)-Materials, Chicago IL, Nov. 5-6, 2006.
  161. (Invited) Wong, S., Naguib, H.E., and Park, C.B., Effect of processing parameters on the cellular morphology and mechanical properties of thermoplastic polyolefin (TPO) microcellular foams. 2006 ASME International Mechanical Engineering Congress and Exposition (IMECE2006)-Materials. Chicago IL, Nov. 5-6, 2006.
  162. (Invited) Jo, C. and Naguib, H.E. Effect of nanoclay and processing conditions on the cell morphology and mechanical properties of HDPE/clay nanocomposite foams. Foams 2006 Proceedings. 134-140, Chicago IL USA, Sept. 13-14, 2006.
  163. Jo, C., Fu, J., and Naguib, H.E. Modeling of the effect of intercalated clays on the tensile properties of PMMA/clay nanocomposite foams. ANTEC 2006 Charlotte NC, May 7-11, 2006.
  164. Perron, J., Naguib, H.E., Daka, J., and Chawla A., Parametric study to optimize the processing parameters and the physical properties of porous PLGA 85/15 scaffold. ANTEC 2006 Charlotte NC, May 7-11, 2006.
  165. Hu, X., Nawaby, A.V., Naguib, H.E., Day, M., Ueda, K., and Liao, X. Physical and structural changes in PLA-nanocomposite/CO2 system. ANTEC 2006 Charlotte NC, May 7-11, 2006.
  166. Price, A., Jnifene, A., and Naguib, H.E. Biologically inspired anthropomorphic arm and dextrous robot hand actuated by smart-material-based artificial muscles. SPIE Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring. San Diego CA, Feb. 26 – Mar. 2, 2006.
  167. (Invited) Simkevitz, S.L. and Naguib, H.E. A study on the thermomechanical behaviour of a two part resin system shape memory polymer. CANSMART 2006. Toronto ON, Oct. 12-13, 2006.
  168. (Invited) Edgerton, A., Price, A., Naguib, H.E., and Jnifene, A., A study on the characterization and mechanical design of shape memory alloys based actuators used in artificial muscles. CSME Forum, Kananaskis AB, May 21-24, 2006.
  169. (Invited) Minkoff, A. and Naguib, H.E. FEA for weld metal deposition process on boiler tubes. CSME Forum, Kananaskis AB, May 21-24, 2006.
  170. (Invited) Attala, Y., Attala, N., Fu, J., and Naguib, H.E. The effect of processing parameters on the acoustical efficiency of open-cell PMMA materials. SAE 2006 World Congress, Detroit, 2006.
  171. Hu, X., Nawaby, A.V., Naguib, H.E., Day, M. Ueda, K., and Liao, X. Polylactic acid (PLA)-CO2 foams at sub-critical conditions. ANTEC 2005 Technical Papers. 7: 187-190, Boston MA, May 1-5, 2005.
  172. Fu, J., Jo, C., and Naguib, H.E. The effect of the processing parameters on the mechanical properties of PMMA microcellular foams. ANTEC 2005 Technical Papers. 50: 2616-2621, Boston MA, May 1-5, 2005.
  173. (Invited) Manninnen, A., Naguib, H.E., Nawaby, A.V., Liao, X., and Day, M. Effect of clay content on the thermal and physical characteristics of PMMA nanocomposite foams. Foams 2004 Wilmington DE, Oct. 6-7, 2004.
  174. Lee, P.C., Naguib, H.E., Park, C.B., and Wang, J. Increase of open-cell content by plasticizing the soft regions with a secondary blowing agent, SPE ANTEC Chicago IL, May 16-20, 2004.
  175. Manninnen, A., Naguib, H.E., Nawaby, A.V., and Day, M. Kinetics of gas sorption and diffusion in polymer-clay nanocomposites. ANTEC Chicago IL, May 16-20, 2004.
  176. (Invited) Manninnen, A., Naguib, H.E., Nawaby, A.V., and Day, M. PMMA nanocomposite fabrication & thermal transitions. 16th Canadian Materials Science Conference. Ottawa ON, Jun. 5-8, 2004.
  177. (Invited) Park, C.B., Padareva, V., Lee, P.C., and Naguib, H.E., Extruded open-celled LDPE-based foams using supercritical CO2. Polymer-Supercritical Fluid Systems and Foams Conference, Tokyo, Japan, Dec. 4-5, 2003.
  178. (Invited) Naguib, H.E., Wang, J., Park, C.B., Mukhopadhyay, A.K., and Reichelt, N. Effect of recycling on the MW, rheological properties, and foaming behaviors of branched PP. PPS-19, Melbourne, Australia, July 7-10, 2003.
  179. (Invited) Padareva, V., Park, C.B., Lee, P.C., and Naguib, H.E., Filamentary extrusion of open-celled low density polyethylene (LDPE) and low density polyethylene/polystyrene (LDPE/PS) foams using melt structure non-homogeneity and processing temperature control. PPS-19, Melbourne, Australia, July 7-10, 2003.
  180. Naguib, H.E., Park, C.B., Lee, P.C., Xu, D., and Reichelt, N. Effect of talc on the volume expansion behavior of extruded PP foams. SPE ANTEC 2003.
  181. (Invited) Naguib, H.E. and Park, C.B., Fundamental governing mechanisms for volume expansion of extruded polypropylene foams. Key note paper, Regional PPS Meeting, Taipei, Taiwan, 2002.
  182. (Invited) Naguib, H.E., Yoon, E.Y., Park, C.B., and Reichelt, N. Fundamental foaming mechanisms governing the volume expansion of extruded polypropylene foams. Foams 2002 Houston, Texas, 2002.
  183. (Invited) Naguib, H.E., Park, C.B., Wang, J., Mukhopadhyay, A.K., and Reichelt, N. Effect of recycling on the rheological properties and foaming behaviors of branched PP. Blowing Agents and Foaming Processes. 20, Heidelberg, Germany, May 27-28, 2002.
  184. (Invited) Naguib, H.E., Yoon, E.Y., and Park, C.B. Fundamental governing mechanisms for volume expansion of extruded propylene foams. Regional PPS Meeting, Antalia, Oct. 2001.
  185. Naguib, H.E., Xu, X., Richards, E.V., and Park, C.B. Measurement of the PVT properties of propylene/butane solutions. Polymer Processing Society-17, Montreal, May 2001.
  186. (Invited) Naguib, H.E., Park, C.B., Hesse, A., Panzer, U., and Reichelt, N. Strategies for achieving fine-celled low-density polypropylene foams. Blowing Agents and Foaming Processes. Frankfurt, 2001.
  187. Naguib, H.E., Xu, J.X., and Park, C.B. Effects of blending on the foamability of branched propylene materials. SPE ANTEC, 2001.
  188. Naguib, H.E., Richards, E.V., Pop-Iliev, R., Xu, J.X., and Park, C.B. Measurement of the swelling of PP with dissolved butane. SPE ANTEC 2001.
  189. (Invited) Naguib, H.E., Pop-Iliev, R., Xu, J.X., Richards, E.V., and Park, C.B. Measurement and modeling of the PVT properties of propylene/butane solutions. PPS-17 Meeting, Montreal, 2001.
  190. Park, S.S., Park, C.B., Ladin, D., Naguib, H.E., and Tzoganakis, C. Measurement of the PVT properties of a polymer/gas solution using a foaming extruder and a gear pump. SPE ANTEC 2000.
  191. Ladin, D., Park, C.B., Park, S.S., and Naguib, H.E., Measurements and modeling of the rheological properties of biodegradable PBS/carbon dioxide solutions. SPE ANTEC, 2000.
  192. Naguib, H.E., Song, S.-W., Park, C.B., and Byon, Y.J. Effect of supercritical carbon dioxide and nitrogen on crystallization of linear and branched propylene resins filled with foaming agents. SPE ANTEC, 2000.
  193. Naguib, H.E. and Park, C.B. A study of melt fracture of linear and branched propylene/butane solutions with foaming additives. SPE ANTEC 2000.
  194. Naguib, H.E. and Park, C.B. Challenge to the production of low-density propylene foams in extrusion. Foams 2000 Proceedings, Parsippany, New Jersey, 2000.
  195. Park, S.S., Park, C.B., Ladin, D., Naguib, H.E., and Tzoganakis, C. On-line measurement of polymer melt specific volume using a gear pump. SPE ANTEC 1999.
  196. Lee, M., Park, C.B., Tzoganakis, C., and Naguib, H.E., Comparison of various viscosity models for PS/CO2 solutions. SPE ANTEC 1999.
  197. (Invited) Park, C.B., Liu, Y., and Naguib, H.E., Challenge to forty-fold expansion of biodegradable polyester foams. Foams ’99 Proceedings. Parsippany, New Jersey, 1999.

 Abstracts and Posters Publications

  1. Lee, K Y., Naguib Hani E, Lian K, Multiwall Carbon nano-tubes/conductive polymer composite for supercapacitor applications, poster S06-154, Polymer Processing Society PPS 30 conference Cleveland Ohio June 9 -14, 2014.
  2. Rizvi R., Naguib H E, Biddiss E, Piezoresistance in Polymer Nanocomposites, poster S06-98, Polymer Processing Society PPS 30 conference Cleveland Ohio June 9 -14, 2014.
  3. Ghaffari S., and Naguib H E, “Permeability Study of LED polymer Lens, Final Report, Crystal Fountain, 2014.
  4. In E. and Naguib H E. , Polymers Gels For Medical Imaging, Bamn 2013, South Korea August 2013.
  5. Leung S., Khan O and Naguib H E, “Development of Novel Graphene and Carbon Nanotubes Based Multifunctional Polymer Matrix Composites”, Abstract in the International Conference on Nanoscience + Technology (ICN+T2012) – July 23-27, 2012, Paris, France.
  6. Naguib, H. E., “New materials advances for smart electro-active polymers” Abstract in the 4th International Smart Materials and Structures Systems CIMTEC, Terme, Italy, June 2012
  7. Naguib H. E., Driving in the nano lane, Nanocomposite R&D explores lighter and greener materials, technical article in June 2011 issue of Canadian Manufacturing.
  8. Naguib H E, Development of Adaptive Electroactive Polymers for Actuators Applications, Abstract in the 94th Canadian Chemistry Conference and Exhibition Montreal, June 5-9, 2011
  9. Leung S., Dawson F. and Naguib H E., Multifunctional Composites for Electronic Packaging, Final Technical report to AEG Power Solutions, 2011.
  10. Rizvi R., Cochrane B., Vasquez S., Naguib H E, Wood Adams P., Lee P, Fabrication and Characterization of Solid and Porous PLA-Chitin Composites, Poster session in PPS 2010, Banff 2010.
  11. Rizvi R and Naguib H E., Viscoelastic Behavior of rubber components, final report to Magna Closures in Toronto, 2009.
  12. Cochrane, B., Khan, O., Rizvi, R., and Naguib, H.E. Development and characterization of foams of poly-d-l-lactic acid (PLA) and their nanocomposites, Poster session at Foams 2008, 2008.
  13. Turner, E., Ma, W., Leung, L., and Naguib, H.E. Fabrication of porous polycaprolactone scaffolds for tissue engineering applications. Poster session at Foams 2008, 2008.
  14. Tan, A.C. and Naguib, H.E. Synthesis and characterization of partially exfoliated poly(methyl methacrylate)-clay nanocomposites and foams. Poster session at CMSE conference, Hamilton Ontario, 2007.
  15. Lam, K. and Naguib, H.E. A study on the thermal barrier properties of PMMA-clay nanocomposite solids and foams. Poster session at CMSE conference, Hamilton, Ontario, 2007.
  16. Cocaud, C., Edgerton, A., Price, A., Jnifene, A., and Naguib, H.E. Smart materials based artificial muscles. Poster presentation Precarn Incorporated, June, 2004.

Patents

  1. Dontula, J. Greener, C. Fleischer, C.B. Park, P.C. Lee, J. Wang, and H.E. Naguib, “A Manufacturing Process for Open Celled Microcellular Foam”, U.S. patent 6598365 B2, 2005.